21

Using the audio

Using the projector’s speakers

Connect the audio source to the Audio In or Audio L/R connectors to hear audio
through the projector speakers. You may use the projector’s speakers by connecting
a microphone to the Microphone input connector.
Amplified speakers may also be connected to the projector using the Audio Out
connector.
To adjust the volume, press the Volum e buttons on the remote.

Troubleshooting Audio

If you aren’t hearing the audio, check the following:
• Make sure the audio cable is connected to the Audio In or Audio L/R
connectors on the projector, and that the other end of the cable is connected to
an Audio Out connector on the source (not a “line-in” or “microphone”
connector).
• Make sure the volume is turned up enough. Press the Volu me button on the
remote.
• Make sure the correct source is active.
• Adjust the audio source.
• If playing a video, make sure the playback has not been paused.
connect PC audio cable
Video Out HDMI Out
Audio Out
L R
connect video source audio
cable
connect microphone