Page 9INF7021/INF8021 Hardware Guide
4) Connect one end of the AC power cord to the AC In jack on the back of the speakers.
5) Connect the other end of the AC power cord to the AC Out jack on the boom connector panel of the monitor.
ON/OFF POWER
SUB L
INPUT
6) Plug the speakers’s audio cable into the Audio Out (RCA R/L) jack on the boom connector panel located on the back of the
monitor.
7) Turn the power switch ON.
Attaching the HD Video Conferencing Camera
1) Remove the plasc lm from the camera lens.
2) Align the camera bracket with the screw holes on the top edge of the backside of the monitor and then secure the camera to
the monitor with the two provided thumb screws.
3) Plug the USB cable into the USB slot immediately below the camera on the back of the monitor.
4) Manually lt and pan the camera (+/- 40°) as desired.