Introduction, Image Resolution, LP290 | InFocus LP280 guide

INTRODUCTION

The InFocus® LP280™ and LP290™ multimedia projectors are specifically designed for multipurpose use. They are easy to con- nect, easy to use, easy to transport, and easy to maintain. The LP280 has native SVGA 800x600 resolution, the LP290 has XGA 1024x768 resolution. The user interfaces of the two products are identical; information in this user’s guide applies to both prod- ucts.

Image Resolution

LP280

The SVGA resolution of the LP280’s projected image is 800x600. The projector is compatible with screen resolutions up to 1280x1024. If your computer’s screen resolution is higher than 1280x1024, reset it to a lower resolution before you connect the projector.

LP290

The XGA resolution of the LP290’s projected image is 1024x768. The projector is compatible with screen resolutions up to 1280x1024. If your computer’s screen resolution is higher than 1280x1024, reset it to a lower resolution before you connect the projector.

NOTE: The LP280 automatically

expands 640x480 images to

800x600.

NOTE: The LP290 automatically

expands 640x480 and 800x600

images to 1024x768.

1

Image 9

InFocus LP280 manual Introduction, Image Resolution, LP290

Contents

LP280/290 Page Safety Certifications FCC Warning CanadaEN 55022 Warning Australian Certification C-tick mark Trademarks Declaration of Conformity Table of Contents Index Appendix Safety Instructions Safety Definitions Safety SymbolsSafety Terms Important Operating Considerations Customer Service Introduction Image ResolutionLP280 LP290 Compatibility Unpacking the ProjectorDiately if anything is missing Shipping box contents Rear view of projector If You Need Assistance Usage Guidelines Warranty F t Setting UP the Projector T t i n g O j e c t o r Do you want to play your computer’s audio on the projector? Connecting a Computer T t i n g O j e c t o r Connecting a Video Player T t i n g O j e c t o r Powering up the Projector Turning Off the Projector Using the Projector Basic Image AdjustmentAdjusting the Projector I n g O j e c t o r Using the Remote Control Power Using the Keypad and Remote ButtonsMenu Source/Select keypad only or Computer and Video remote only Volume Arrow buttonsKeystone Effect remote only Black remote onlyContrast remote only Brightness remote only Using the On-Screen Menus Contrast Basic MenuBrightness Color Setup ResetAbout Picture menu Setup menu System menu Effect menu Language menu Service menu Userlogo menu Maintenance & Troubleshooting Cleaning the LensCleaning the Dust Filters I n t e n a n c e Troubleshooting Replacing the Projection Lamp Replacing the Batteries in the Remote Control Using the Security Lock Troubleshooting Problem The projector is not runningLEDs Problem Color or text not being projected Problem Only the start-up screen displaysProblem The screen resolution is not right Problem Image isn’t centered on the screen Problem Image is out of focus Problem Image is too wide or narrow for screenProblem Image and menus are reversed left to right Problem Projected image is distortedPage I n t e n a n c e Troubleshooting Appendix Specifications Standard Accessories Ship with the projector Part Number Accessories HW-RF-REMLSR Optional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation Chart FN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using SimulScan Using Video Mirroring with a PowerBook Computer Projected Image Size Numerics Index D e Page D e InFocus-Branded Products Limited Warranty Warranty Limitation and Exclusion