Adjusting the image
| adjust height | release | release |
Adjust the height of the projector, if necessary, by pressing the release but- |
| button | button |
tons on each side of the projector’s front to extend the elevator feet. |
|
|
|
|
| elevator | elevator |
|
| foot | foot |
Position the projector the desired distance from the screen at a 90 degree | adjust distance |
|
|
angle (perpendicular) to the screen. |
|
| |
|
|
|
See page 43 for a table listing screen sizes and distances.
Adjust the zoom or focus by pressing the power Zoom or power Focus | adjust zoom and focus | ||||
|
|
|
|
| |
buttons on the keypad until the desired image size and focus are produced. | zoom focus | ||||
You can also adjust the zoom and focus via the menus. See page 32 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If the image is not on the screen or viewing area, adjust it by pressing the lens shift button on the keypad.
Press the upper Lens Shift button to shift the lens upward. Press the lower Lens Shift button to shift the lens downward.
You can also adjust the lens shift via the menus. See page 32.
adjust lens shift
lens shift
Adjust the Contrast or Brightness in the Picture menu. | adjust Contrast or Brightness |
contrast
See page 31 for help with the menus.
brightness
13
