Ingersoll-Rand manual Operators Manual, 361T538Fxx 1 1/4in. Filter Assembly

OPERATOR'S MANUAL 361T538Fxx

361T538Fxx 1 1/4in. FILTER ASSEMBLY

IMPORTANT: READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING,

OR SERVICING THIS EQUIPMENT

364-295

ViISUAL INDICATOR r 120PSI

350-292 O-Ring (2)

FILTER ELEMENT 361T538ESP STAB POINT 361T538E03 30 MESH 361T538E04 40 MESH 361T538E06 60 MESH 361T538E09 90 MESH

350-214

HP STREET ELBOW

409-464

BRACKET

360-003

O’RING

362-333

TEFLON BACK-UP RING

300-847

BLEEDER VALVE

1 1/4 in. NPT Threads

361T538RK

REPAIR KIT INCLUDES:

(1)360-003 O’RING

(1)362-333 BACK-UP RING

FILTER ASSEMBLY PART NUMBERS

361T538FSP	STAB POINT	Large orifice
361T538F03	30 Mesh Element	.022 in. orifice
361T538F04	40 Mesh Element	.015 in. orifice
361T538F06	60 Mesh Element	.010 in. orifice
361T538F09	90 Mesh Element	.0065 in. orifice

WHEN REPAIRING THE FILTER TURN OFF THE PUMP SUPPLY PRESSURE AND BLEED THE MATERIAL PRESSURE FROM THE PUMPING SYSTEM AND FILTER BOWL.

MAINTENANCE

Replace the Filter element when there is a 500- pound pressure drop across it.

Note: Material must be flowing to check the pressure drop.

REBUILDING INSTRUCTIONS

1)Close the ball valves and depressurize the filter by opening the bleeder valve.

2)Unscrew the Filter Bowl and remove the Element.

3)Clean the Filter Bowl and Housing.

4)Replace the O’ring and Back-up Ring and lubricate.

5)Install new Element in the Filter Housing.

6)Thread on the Bowl and tighten to 50 Ft. Lbs.

Ingersoll-Rand
1872 Enterprise Drive	Phone	(248) 293-5700
Rochester Hills MI 48309	Tech Support	(866) 284-5509

Doc#: D-361T538Fxx 1 Rev. Level B Date: June 2003