Ingersoll-Rand 650950-X specifications 062 SQ. Hydraulic Motor, Service Kits, Specifications

OPERATOR’S MANUAL		650950 X
INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING.		RELEASED: 8-28-98
INCLUDE MANUALS: 6720X-X Lower Pump End (pn 97999-788), 67147-B Hydraulic Motor (pn 97999-1219) &		REVISED: 10-12-11
S-632 General Information Manual (pn 97999-624)	650950-X4X	(REV. F)
2.062 SQ.” HYDRAULIC MOTOR
	FOUR BALL PUMP SERIES
0.2:1 RATIO
5.75” STROKE	300 SERIES STAINLESS STEEL

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

SERVICE KITS

•Use only genuine AROR replacement parts to assure compatible pressure rating and longest service life.

•637449 for repair of hydraulic motor section.

•637318-X4B for repair of lower pump section. Refer to the chart on page 2 for description of -X4X options.

SPECIFICATIONS

Model Series (Refer to option chart) . . . .	. . . . 650950-X4X
Type	Hydraulically Operated, Four Ball
Ratio	. . . . 0.2:1
Hydraulic Motor	. . . . 67147-B
Motor Repair Kit	. . . . 637449
Motor Size	. . . . 2.062 sq." (13.3 sq. cm)
Stroke	. . . . 5.75" (14.6 cm)
Hydraulic Inlet (female)	. . . . 3/8 - 18 N.P.T.F. - 2
Hydraulic Return (female) . . . .	. . . . 1/2 - 14 N.P.T.F. - 2
Lower Pump End Series	. . . . 67201-X4X
Lower Pump Repair Kit	. . . . 637318-X4B
Material Inlet (female)	. . . . 1-1/2 - 11-1/2 N.P.T.F. - 1
(male)	2 - 11-1/2 P.T.F. SAE Spec Short
Material Outlet (female)	. . . . 1 - 11-1/2 N.P.T.F. - 1
Weight	. . . . 72 lbs (32.7 kgs)

PERFORMANCE

Hydraulic Inlet Pressure Range .	50	- 1200 p.s.i. (3.4 - 82.8 bar)
Fluid Pressure Range	10	- 278 p.s.i. (0.69 - 19.2 bar)
Required H-power @ 50 c.p.m	3.2 @ 1200 p.s.i. (82.8 bar)
Hydraulic flow required @ 50 c.p.m. .		4.9 g.p.m. (18.5 l.p.m.)
Maximum rec’d Cycles / Minute . . .	. .	50
Displacement In3 Per Cycle	. .	103.6
Volume / Cycle	. .	57.4 oz. (1697.2 ml)
Cycles Per Gallon	. .	2.23
Flow @ 50 Cycles / Minute	. .	22.4 g.p.m. (84.9 l.p.m.)
Noise Level	. .	N/A
Maximum Temperature Limit	. .	130_ F (54_ C)

PUMP DATA

	MODEL 650950-X4X
		Hydraulic Inlet (not shown)
		3/8 - 18 N.P.T.F. - 2 (female)
		Hydraulic Outlet (female)
		1/2 - 14 N.P.T.F. - 2
45-5/16"		Hydraulic Motor 67147-B
(1150.3 mm)
		(see manual 67147-B)
		Spacer Section
		Screw 93342-1 (3)
		Washer Y79-625 (3)
		Spacer Rod 94253 (3)
30-15/16"
(785.2 mm)		Connector (see figure 2)
		Material Outlet (female)
		1 - 11-1/2 N.P.T.F. - 1
		(152_ from hydraulic inlet)
	19-9/16"	Lower Pump 67201-X4X
		(see manual 6720X-X)
	(496.3 mm)
		2 - 11-1/2 P.T.F. SAE Spec. Short (male)
		1-1/2 - 11-1/2 N.P.T.F. - 1 (female)
Figure 1	Material Inlet
Accessories available: 61937-1 wall bracket, 67187-2 mounting post.

IMPORTANT

This is one of the four documents which support the pump. Re- placement copies of these forms are available upon request.

=650950-X Model Operator’s Manual (pn 97999-795)

-S-632 General Information - Industrial Piston Pumps (pn 97999-624)

-6720X-X Lower Pump End Operator’s Manual (pn 97999-788)

-67147-B Hydraulic Motor Operator’s Manual (pn 97999-1219)

INGERSOLL RAND COMPANY LTD

209 NORTH MAIN STREET – BRYAN, OHIO 43506

(800) 495-0276 FAX(800) 892-6276 © 2011 CCN 99745465

www.ingersollrandproducts.com