Stroke, Service Kits | Ingersoll-Rand AF1260-XX instruction

OPERATOR’S MANUAL

AF1260-XX

INCLUDING: SERVICE KITS, TROUBLESHOOTING, PARTS LIST, DISASSEMBLY & REASSEMBLY.

12” AIR MOTORS

6” STROKE

Also covers 637489 service kits

RELEASED: 8-16-10

REVISED: 8-10-12 (REV. 02)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

THIS MANUAL COVERS THE FOLLOWING MODELS

MODEL

AF1260

AF1260-01

SERVICE KITS

Use only genuine ARO® replacement parts to assure com- patible pressure rating and longest service life.

637489 for general repair of all air motors.

GENERAL DESCRIPTION

WARNING DO NOT EXCEED MAXIMUM OPERATING PRESSURE AS INDICATED ON PUMP MODEL PLATE. WARNING REFER TO GENERAL INFORMATION SHEET FOR ADDITIONAL SAFETY PRECAUTIONS AND IMPOR- TANT INFORMATION.

This manual only covers the air motor section. It is one of four documents which support an ARO pump. Replace- ment copies of these forms are available upon request.

Pump Model Operator’s Manual.

General Information for Air Operated or Hydraulically Operated Pumps.

Lower Pump End Operator’s Manual.

 Air or Hydraulic Motor Operator’s Manual.

The 12” air motor is a general purpose power unit and is used with many 2-ball and chop check pumps. It uti- lizes tie rod type construction for easy breakdown and it connects to the various lower ends via tie rods for easy operation. Consult pump model operator’s manual for specific instructions.

MODEL DESCRIPTION CHART

A F 12 X X – XX

Air Motor Diameter

12 - 12”

Stroke Length 6 - 6”

Air Motor Base/Rod Combination

0 - Divorced pump base with quick coupled rod connection (See Figure 3)

Air Motor Options

01 – Integrated On/Off Valve and Regulator

INGERSOLL RAND COMPANY LTD

209 NORTH MAIN STREET – BRYAN, OHIO 43506

 (800) 495-0276  FAX (800) 892-6276

CCN 15331416

AF1260AF1260-01

Figure 1

OPERATING AND SAFETY PRECAUTIONS

DO NOT EXCEED MAXIMUM AIR INLET PRESSURE OF 90 P.S.I. (6.2 BAR) OR 75 CYCLES PER MINUTE.

CAUTION High pressure equipment – Always dis- connect air supply and relieve material pressure be- fore attempting to service.

A ground lug is located on the air motor. This ground lug allows proper grounding of the pump.

MATERIAL CODE

[A]	=	Aluminum	[D]	=	Acetal
[B]	=	Buna Nitrile	[PP]	=	Polypropylene
[Br]	=	Brass	[SS]	=	Stainless Steel
[Bz]	=	Bronze	[Ef]	=	Epoxy - Fiberglass Filament Reinforced
[C]	=	Carbon Steel	[CK]	=	Ceramic

DISASSEMBLY OF AIR MOTOR

NOTE: All threads are right hand.

1.Force the piston assembly up by pushing the (115) rod toward the top of the air motor.

2.Remove the (201) muffler/muffler assembly for ease of disassembly.

3.Remove the four (138) socket head screws from the (140) head manifold and the one (138) socket head screw form the (122) head plate. Remove the (140) head manifold by pull- ing up and outward to remove from tubes (114) and (137).

4.Remove (141) major gasket from the (140) head manifold.

(continued on page 3)

AF1260-XX specifications

The Ingersoll-Rand AF1260-XX is an advanced air compressor that exemplifies the combination of reliability, performance, and efficiency. Designed for a variety of industrial applications, this model is particularly notable for its robust construction and innovative features that meet the demands of both small and large businesses.

One of the standout features of the AF1260-XX is its high-efficiency motor, which significantly reduces energy consumption while delivering powerful performance. This motor is designed to operate quietly, minimizing disruptions in a work environment. Coupled with an advanced airend design, the compressor is built to deliver superior airflow and maintain a consistent pressure output, ensuring that it can handle the requirements of pneumatic tools, spray painting, and other air-driven equipment.

The AF1260-XX is equipped with a state-of-the-art control system that allows users to monitor and adjust settings with ease. This intuitive interface provides real-time data on operational metrics, enabling users to make informed decisions that enhance productivity. Additionally, the compressor features advanced diagnostic capabilities, helping to proactively identify potential issues before they escalate into costly repairs.

Another remarkable characteristic of this model is its durability. The AF1260-XX is constructed with high-quality materials that are resistant to wear and tear. Its design incorporates robust vibration isolation features, reducing the risk of damage from operational stress. Moreover, the compressor includes advanced filtration systems that protect internal components from dust and impurities, extending its lifespan considerably.

Portability is a key consideration in the design of the AF1260-XX. With its compact footprint and integrated handles, this model can be easily relocated, making it suitable for diverse job sites. Furthermore, the compressor is designed for easy maintenance, with accessible parts that simplify routine checks and servicing, ultimately reducing downtime.

Ingersoll-Rand’s commitment to sustainability is evident in the AF1260-XX, which is engineered to meet stringent environmental standards. By utilizing energy-efficient technologies, this compressor not only lowers operational costs but also minimizes its environmental footprint.

In summary, the Ingersoll-Rand AF1260-XX combines cutting-edge technology, robust design, and user-friendly features to deliver an air compressor that meets the evolving needs of industrial users. Its efficiency, reliability, and ease of maintenance make it a standout choice for businesses looking to enhance their operations.

Ingersoll-Rand AF1260-XX manual Stroke, Service Kits, General Description

Models: AF1260-XX