E2010 CCN99755480
(800)276-4658 DFAX (800) 266-7016
INGERSOLL RAND COMPANYLTD
209NORTH MAIN STREET -- BRYAN,OHIO 43506
OPERATOR’S MANUAL PH10A -X-X
RELEASED: 7-7-0 0
REVISED: 10-15-10
(REV. M)
INCLUDING: OPERATION,INSTALLATION & SERVICE

1” HIGH PRESSURE DIAPHRAGM PUMP

3:1 RATIO(METALLIC)
READ THIS MANUAL CAREFULLYBEFORE INSTALLING,
OPERATINGO RSERVICING THIS EQUIPMENT.
Itis the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Referto “Model Description Chart” to match the pump material options.
637338for air section repair (see page 6).
637339for fluid section repair (models PH10A-XXX-XSX)(see page 4).
637339-1for fluid section repair (models PH10A-XXX-XHX)(see page 4).
PUMP DATA
Models see“Model Description Chart” for “-XXX”............
PumpType MetallicAir Operated, High Pressure,........
DoubleDiaphragm.
Material see“Model Description Chart”............
Weight 94.73lbs (42.97 kg).........................
MaximumAir Inlet Pressure 100p.s.i. (6.9 bar).........
MaximumOutlet Pressure 300p.s.i. (20.4 bar)..........
MaximumFlow Rate (flooded inlet) 26g.p.m. (98.4 l.p.m.)...
MaximumParticle Size 1/8”dia. (3.2 mm)............
MaximumTemperature Limits (diaphragm / ball / seal material)
Nitrile 10_to180_F(-12_to82_C).................
PTFE 40_to225_F(4_to107_C).................
Displacement/ Cycle @ 100 p.s.i. 0.06gal. (0.23 lit.)....
DimensionalData seepage 8.................
NoiseLevel @ 70 p.s.i., 60 c.p.m. 84.5 db(A)j.....
jThepump sound pressure levels published here have been updated to an Equivalent Continuous
SoundLevel(LAeq) to meet the intent of ANSI S1.13-1971, CAGI-PNEUROP S5.1 using four micro-
phonelocations.
NOTICE: All possible options are shown in the chart. However, certain
combinationsmay not be recommended, consult a representative or the
factoryif you have questions concerning availability.
PH10A-XSS-XXT
1”DIAPHRAGM PUMP Figure1
MODEL DESCRIPTION CHART

PH10 A -X S S -X X T

SeatMaterial
H -Hard 440 Stainless Steel
S -316 Stainless Steel
BallMaterial
H -Hard 440 Stainless Steel
S -316 Stainless Steel
FluidCaps & Manifold Material
S -Stainless Steel
FluidConnection
A - 1 - 11-1 /2 N. P.T.F. - 1
B -Rp 1 (1 - 11 BSP parallel)
DiaphragmMaterial
T PTFE
HardwareMaterial
S -Stainless Steel
CenterSection Material
A -Aluminum
www.ingersollrandproducts.com