OPERATING AND SAFETY PRECAUTIONS

 

READ, UNDERSTAND, AND FOLLOW THIS INFORMATION TO AVOID INJURY AND PROPERTY DAMAGE.

 

 

 

 

 

 

 

laws and safety code requirements.

 

 

 

 

 

 

 

EXCESSIVE AIR PRESSURE

HAZARDOUS MATERIALS

 

 

S Obtain Material Safety Data Sheets on all materials from the

 

STATIC SPARK

HAZARDOUS PRESSURE

 

 

 

supplier for proper handling instructions.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EXPLOSION HAZARD. Models containing alumi-

 

 

 

 

 

 

 

WARNING

 

 

 

 

 

 

 

 

 

 

 

 

 

EXCESSIVE AIR PRESSURE. Can cause person-

 

num parts cannot be used with 1,1,1-trichloroethane, methy-

 

WARNING

 

al injury, pump damage or property damage.

 

lene chloride or other halogenated hydrocarbon solvents

S Do not exceed the maximum inlet air pressure as stated on the

 

which may react and explode.

 

pump model plate.

 

 

 

S Check pump motor section, fluid caps, manifolds and all

S Be sure material hoses and other components are able to with-

 

wetted parts to assure compatibility before using with solvents

 

stand fluid pressures developed by this pump. Check all hoses

 

of this type.

 

 

 

for damage or wear. Be certain dispensing device is clean and

 

WARNING

MISAPPLICATION HAZARD. Do not use models

 

in proper working condition.

 

 

 

 

containing aluminum wetted parts with food products for hu-

 

 

 

 

 

man consumption. Plated parts can contain trace amounts of

 

WARNING

STATIC SPARK. Can cause explosion resulting in

 

severe injury or death. Ground pump and pumping system.

 

lead.

Verify the chemical compatibility of the pump

S Sparks can ignite flammable material and vapors.

 

CAUTION

 

S

The pumping system and object being sprayed must be

 

wetted parts and the substance being pumped, flushed or re-

 

grounded when it is pumping, flushing, recirculating or spray-

 

circulated. Chemical compatibility may change with tempera-

 

ing flammable materials such as paints, solvents, lacquers,

 

ture and concentration of the chemical(s) within the

 

etc. or used in a location where surrounding atmosphere is

 

substances being pumped, flushed or circulated. For specific

 

conducive to spontaneous combustion. Ground the dispens-

 

fluid compatibility, consult the chemical manufacturer.

 

ing valve or device, containers, hoses and any object to which

 

 

 

Maximum temperatures are based on mechani-

 

 

CAUTION

 

 

material is being pumped.

 

 

 

 

 

 

 

 

 

 

 

 

 

cal stress only. Certain chemicals will significantly reduce

S Secure pump, connections and all contact points to avoid

 

 

maximum safe operating temperature. Consult the chemical

 

vibration and generation of contact or static spark.

 

manufacturer for chemical compatibility and temperature lim-

S Consult local building codes and electrical codes for specific

 

 

its. Refer to PUMP DATA on page 1 of this manual.

 

grounding requirements.

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION

 

Be certain all operators of this equipment have

S After grounding, periodically verify continuity of electrical path

 

 

 

been trained for safe working practices, understand it’s limita-

 

to ground. Test with an ohmmeter from each component (e.g.,

 

 

 

tions, and wear safety goggles / equipment when required.

 

hoses, pump, clamps, container, spray gun, etc.) to ground to

 

 

insure continuity. Ohmmeter should show 0.1 ohms or less.

 

CAUTION

Do not use the pump for the structural support of

 

 

the piping system. Be certain the system components are

S Submerse the outlet hose end, dispensing valve or device in

 

 

the material being dispensed if possible. (Avoid free streaming

 

properly supported to prevent stress on the pump parts.

 

of material being dispensed.)

 

 

 

S Suction and discharge connections should be flexible connec-

S Use hoses incorporating a static wire.

 

 

 

 

tions (such as hose), not rigid piped, and should be compatible

S

Use proper ventilation.

 

 

 

 

with the substance being pumped.

S Keep inflammables away from heat, open flames and sparks.

 

CAUTION

 

Prevent unnecessary damage to the pump. Do

S Keep containers closed when not in use.

 

not allow pump to operate when out of material for long periods

 

WARNING

Pump exhaust may contain contaminants. Can

 

of time.

 

 

 

cause severe injury. Pipe exhaust away from work area and per-

S Disconnect air line from pump when system sits idle for long

 

sonnel.

 

 

 

 

periods of time.

S In the event of a diaphragm rupture, material can be forced out

 

CAUTION

 

Use only genuine AROR replacement parts to

 

of the air exhaust muffler.

 

 

 

 

assure compatible pressure rating and longest service life.

S Pipe the exhaust to a safe remote location when pumping haz-

 

 

 

RE-TORQUE ALL FASTENERS BEFORE OPERA-

 

NOTICE

 

 

ardous or inflammable materials.

 

 

 

 

 

 

 

 

 

 

 

 

 

TION. Creep of housing and gasket materials may cause fas-

S Use a grounded 3/8” minimum i.d. hose between the pump and

 

 

teners to loosen. Re-torque all fasteners to insure against fluid

 

the muffler.

 

 

 

 

 

 

 

 

 

or air leakage

 

 

 

 

 

 

 

 

WARNING

HAZARDOUS PRESSURE. Can result in serious

 

 

 

 

 

 

injury or property damage. Do not service or clean pump,

 

 

 

 

 

 

 

 

 

 

 

= Hazards or unsafe practices which could

 

 

hoses or dispensing valve while the system is pressurized.

 

 

WARNING

 

S Disconnect air supply line and relieve pressure from the sys-

 

 

 

 

result in severe personal injury, death or

 

 

tem by opening dispensing valve or device and / or carefully

 

 

 

 

substantial property damage.

 

 

and slowly loosening and removing outlet hose or piping from

 

 

 

= Hazards or unsafe practices which could

 

 

 

 

CAUTION

 

 

pump.

 

 

 

 

 

 

result in minor personal injury, product

 

 

WARNING

HAZARDOUS MATERIALS. Can cause serious in-

 

 

 

 

or property damage.

 

 

jury or property damage. Do not attempt to return a pump to the

 

 

 

= Important installation, operation or

 

 

 

 

NOTICE

 

 

factory or service center that contains hazardous material.

 

 

 

 

maintenance information.

 

 

 

 

 

 

 

 

Safe handling practices must comply with local and national

 

 

 

 

 

 

Page 2 of 8

PM10X-XXX-XXX-A02 (en)

Page 2
Image 2
Ingersoll-Rand PM10X-X-X-A02 manual Operating and Safety Precautions

PM10X-X-X-A02 specifications

The Ingersoll-Rand PM10X-X-X-A02 is a high-performance portable air compressor designed for a variety of applications, from construction sites to industrial uses. Known for its durability, efficiency, and versatility, this model stands out in the market for its compact design and high output capabilities.

One of the main features of the PM10X-X-X-A02 is its powerful engine, which delivers consistent performance under demanding conditions. This compressor is equipped with a reliable, heavy-duty engine that generates substantial air pressure while maintaining fuel efficiency. The unit is capable of producing up to 80 CFM at 100 PSI, making it ideal for powering pneumatic tools and machinery.

In terms of technology, the PM10X-X-X-A02 features advanced control systems that enhance operational efficiency. The integrated air management system automatically optimizes airflow and pressure, ensuring that the right amount of compressed air is delivered at all times. This not only improves the performance of connected tools but also helps to reduce energy consumption, making it a cost-effective solution for users.

Another characteristic that sets the PM10X-X-X-A02 apart is its rugged construction. Built with durable materials and components, this compressor is designed to withstand harsh environments. Its weather-resistant housing protects the internal components from the elements, while its robust frame ensures stability and minimizes vibrations during operation.

The portability of the PM10X-X-X-A02 is another significant advantage. With a compact design and equipped with wheels, it can be easily transported from one location to another. This feature is particularly beneficial for professionals who need to move their equipment frequently, allowing for greater flexibility and efficiency on the job site.

In addition, the PM10X-X-X-A02 is designed with user-friendly features, including easy-to-access maintenance points and an intuitive control panel. This makes it simpler for users to perform routine maintenance and operate the compressor without extensive training.

Overall, the Ingersoll-Rand PM10X-X-X-A02 is a robust, efficient, and versatile portable air compressor suited for various applications. Its combination of power, advanced technology, and portability makes it a reliable choice for professionals in need of a dependable air source. Whether for construction, manufacturing, or other industries, its performance and durability are sure to meet demanding requirements.