Inglis Home Appliances 2225407 manual Refrigerator USE, Ensuring Proper Air Circulation

REFRIGERATOR USE

Ensuring Proper Air Circulation

In order to ensure proper temperatures, you need to permit airflow between the refrigerator and freezer sections. As shown in the illustration, cool air enters through the bottom of the freezer section and moves up. Most of the air then flows through the freezer section vents and recirculates under the freezer floor. The rest of the air enters the refrigerator section through the top vent.

Do not block any of these vents with food packages. If the vents are blocked, airflow will be prevented and temperature and moisture problems may occur.

IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To prevent odor transfer and drying out of food, wrap or cover foods tightly.

Using the Control(s)

For your convenience, your refrigerator control(s) are preset at the factory. When you first install your refrigerator, make sure that the control(s) are still preset to the mid-settings as shown.

NOTE: To turn your refrigerator off, turn the refrigerator control to the word OFF or until the word OFF appears. Your product will not cool when the refrigerator control is set to OFF.

Mid-setting “3”

Mid-setting “3”

Mid-setting “4”

REFRIGERATOR 4 4 FREEZER

IMPORTANT:

■Give your refrigerator time to cool down completely before adding food. It is best to wait 24 hours before you put food into the refrigerator.

■If you add food before the refrigerator has cooled completely, your food may spoil. Adjusting the Refrigerator and Freezer Controls to a higher (colder) than recommended setting will not cool the compartments any faster.

Adjusting Controls

The mid-setting(s) indicated in the previous section should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked.

If you need to adjust temperatures, use the settings listed in the chart below as a guide. On models with two controls, adjust the refrigerator temperature first. Wait at least 24 hours between adjustments and then recheck the temperatures.

CONDITION/REASON:	ADJUSTMENT:
REFRIGERATOR section too	Adjust REFRIGERATOR
warm	or TEMPERATURE
■ Door opened often, large	Control one setting
	higher
amount of food added or room
temperature very warm
FREEZER section too warm/ice	Adjust FREEZER or
not made fast enough	TEMPERATURE Control
■ Door opened often, or large	one setting higher
amount of food added or very
cold room temperature (can’t
cycle often enough)
■ Heavy ice usage
REFRIGERATOR section	Adjust REFRIGERATOR
too cold	or TEMPERATURE
■ Controls not set correctly for	Control one setting
	lower
your conditions
FREEZER section too cold	Adjust FREEZER or
■ Controls not set correctly for	TEMPERATURE Control
	one setting lower
your conditions

10