NT-PS12DC09
QUICK START GUIDE
Setting up the shredder
1Mount the shredder head securely to the rim of the wastebasket. This paper shredder includes a
2Connect the power cord to a standard 120V AC power outlet. The shredder is now ready to be used.
Using your shredder
1Slide the power button from OFF to AUTO.
2Insert paper or one credit card into the paper slot, or one optical disc (CD/DVD) into the optical disc slot.
Caution: Do not insert more than 12 pages, 1 disc or 1 credit card at a time.
Emergency stop switch (ESS)
READY | Lights up when the shredder is turned on and ready to shred. |
|
|
AUTO | This setting allows the shredder to start automatically when an item is |
| inserted into the feed slot. When the paper/credit card/CD/DVD has passed |
| through the slot, the shredder will stop. |
| Caution: Always feed paper in as straight as possible. |
| Caution: Insert no more than twelve sheets of paper or one credit card or |
| optical disc at a time. |
REV | Use the reverse setting to clear a paper jam or to pull out unshredded paper. |
| Caution: Never try to clear a jam by using REV when the wastebasket is full, |
| or the jam could be made worse. |
|
|
OFF | This setting turns off the shredder. For safety reasons, leave the shredder in |
| the OFF position whenever the shredder is unattended or not in use. |
|
|
Door Open | Lights blue if shredder wastebasket is opened or incorrectly mounted. |
Basket Full | Lights yellow when the wastebasket is full and needs to be emptied. |
|
|
Overheat | Lights red when shredder has been run for too long. Stop shredding until |
| light turns off. |
|
|
Overload | Lights orange when shred capacity has been exceeded and shredder is |
| jammed. |
|
|
Emergency | Press to stop the shredder. |
stop switch |
|
|
|
Specifications
Sheet capacity | 12 sheets of 20 lb. bond paper |
|
|
Credit card capacity | 1 at a time |
Optical disk capacity | 1 at a time |
|
|
Paper shred size | 0.28" × 2.09" (0.72 cm × 5.3 cm) pieces |
|
|
Voltage | 120V - 60 Hz 1.1A |
Troubleshooting
•If a jam occurs and the cutter stops, slide the power button to REV and pull out the jammed paper.
•If paper is jammed in the shredder blades, please slide the power button to OFF, unplug the power cord, and remove all paper from the entrance and exit of the feed slot.
•If the shredder is run continuously for long periods of time and the motor overheats, a thermal safety switch automatically turns off the shredder. If this occurs, slide the power button to OFF
and do not use the shredder for 50 minutes.
Maintenance
Once a month, drizzle vegetable oil or cooking oil (nothing petroleum based) on a few pieces of paper and feed them through the shredder.
Cautions
•Repairs must be made by a qualified technician. Do not attempt to repair the shredder yourself.
•Do not alter the shredder or power cord in any way.
•Do not operate the shredder if it or the power cord appears damaged in any way.
•Always unplug the shredder when moving it or not using it for a long period of time.
•Do not shred wet paper, carbon paper, or vinyl or plastic bags. Shredding these items may reduce the shredder’s performance or cause shock or injury.
•Empty the wastebasket regularly to ensure that the paper slot does not become blocked.
•Do not use garbage bags with this shredder. Garbage bags could prevent the shredder wastebasket from being correctly mounted, which would prevent the shredder from functioning
properly. |
|
|
|
|
|
|
WARNING | Shredder is not | Do not insert | Do not spray | Avoid getting | Avoid getting | Do not put |
| intended for | fi ngers into | or keep any | hair near the | loose clothing | paper clips in |
| use by children | the paper slot | aerosol products | paper slot or | or jewelry near | the shredder |
|
| or the optical | in or around | the optical disc | the paper slot |
|
|
| disc slot | shredder | slot | or the optical |
|
|
|
|
|
| disc slot |
|
12/31/2008 12:38:13 PM