SmartDose Liquid Oxygen Portable Overview
The illustrations show the parts of the SmartDose Liquid Oxygen Portable.
Activation Button
(also used to adjust settings)
|
| Batteries |
Battery | Oxygen | (2AA cells) |
Outlet |
| |
Indicator |
| |
Connector |
| |
Light |
| |
|
|
Fill Valve
Dose Indicator Lights |
|
CF (Continuous Flow/SmartDose) Switch | LOX Fill Coupler |
| |
(Pull out for Continuous Flow only.) |
|
Cleaning and Maintenance
Removing Frost
Under certain environmental conditions, frost may form on the vaporizer coil and on the case. As the unit thaws, the possibility exists for melted frost to leak from the bottom of the unit. You can remove it by wiping the case with a cloth. Exercise caution when placing the unit on valu- able, water sensitive surfaces.
Cleaning and Maintenance
There are no
portable. Contact your medical equipment provider in the event that your SmartDose unit requires service.
Keep the exterior of the SmartDose Liquid Oxygen Portable clean using a clean, damp,
Clean and dry the coupler on the SmartDose Liquid Oxygen
Portable with a clean, dry,
Cleaning and Maintenance
Chad Therapeutics recommends using only cannula specifically intended to be used with oxygen delivery systems.
Cannula should be capable of delivering up to 10 LPM of
continuous flow; maximum length that can be used is 7 feet. Contact your medical equipment provider for recommendations and details.
Refer to the cannula manufacturer’s instructions for proper cleaning and maintenance procedures.
8 | 17 |
