8Press or to highlight the Password field, then press ENTER. An on-screen keyboard appears.

9Press , , or to highlight the first letter in the password, then press ENTER. Repeat this step to enter

the rest of the password. If you make a mistake, use the backspace key to delete the character

10 After you enter the password, highlight , then press ENTER to close the keyboard.

11Press to highlight OK, then press ENTER. The Network List reopens.

12If necessary, press or to highlight the network again, then press ENTER. The option list reopens.

Connecting to a wireless network using WPS (Wi-Fi Protected Setup) Push button

NOTE: The steps in this task are based on using the remote control that came with your player.

To set up a network connection:

1Press ENTER. The Settings menu opens.

2Press or to select Network. The Network menu opens.

3Press , press or to highlight Wireless, then press ENTER. A list of network options opens.

4Press or to highlight WiFi Protected Setup, then press ENTER. The following screen appears.

13Press or to highlight Connect, then press ENTER. If the wireless network is working, you should see the message shown below:

You may also briefly see a “connected” message appear on the TV. Press ENTER to remove the message from the TV screen.

If the message shown above does not appear, your Blu-ray player is not connected to the network. Repeat this task again.

5Press the WPS button on your router. The following screen should appear. When you see “Success” on the screen, your player is connected to the router.

6Press ENTER to close the message.

© 2009 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.

ENGLISH 09-0929