Automatically scanning for channels using cable TV
To automatically scan for channels using cable TV:
1Make sure that you have selected the TV signal source. For more information, see “Selecting the TV signal source” on page 11.
2Press MENU, then press 
or 
to highlight 
(TV mode icon). The channel menu opens.
Antenna/CableCable
Auto Channel Search
Add/Skip Channels
Favorites |
|
Channel No. | 80.3 |
Channel Label | PBS1DTV |
Select OK:Enter Menu:Exit
3Press OK/ENTER or 
to access the menu.
Antenna/CableCable
Auto Channel Search
Add/Skip Channels
Favorites |
|
|
Channel No. |
| 8.2 |
Channel Label |
| |
Select | Adjust | Menu:Return |
4Press 
or 
to highlight Auto Channel Search, then press OK/ENTER or 
. The following screen opens with Cable System highlighted.
Cable System | AUTO |
Start to Scan |
|
Select 
Adjust Menu:Return
5Press 
or
to select the cable system you use (AUTO, STD, IRC, or HRC). If you are not sure, select AUTO.
6Press
or
to highlight Start to Scan, then press OK/ENTER or 
to start scanning. A progress screen appears.
RF CH | 12 |
Found4
Menu/Exit: Exit
Your TV scans for analog and digital channels and stores the information in the channel list. When the scan is complete, your TV tunes to the first channel in the channel list.
Note
You can press MENU or EXIT to exit the scan, but you must run the scan again to create a complete channel list.
Hiding TV channels
You can hide TV channels in the channel list. When you press CH+ or
To hide TV channels:
1Make sure that you have scanned for TV channels. For more information, see “Automatically scanning for TV channels using the antenna” on page 11 or “Automatically scanning for channels using cable TV” on page 12.
2Press MENU, then press 
or 
to highlight 
(TV mode icon). The channel menu opens.
Antenna/CableCable
Auto Channel Search
Add/Skip Channels
Favorites |
|
Channel No. | 80.3 |
Channel Label | PBS1DTV |
Select OK:Enter Menu:Exit
www.insigniaproducts.com | 13 |