To charge the battery

1Plug the battery charger power cord into a power outlet.

2Insert the battery into the charging slot. Make sure that the + and – on the battery align with the + and – in the charging slot.

Installing the battery

1Make sure that your camera is turned off.

2Slide the cover in the direction of the arrow, then lift the cover away from the battery compartment

3Insert the battery into the battery compartment. Make sure that the + and – symbols on the battery line up with the + and – symbols on your camera.

4Close the battery compartment cover, then slide the cover in the direction of the arrow to lock it in place.

Inserting a memory card

1Open the memory card compartment at the bottom of the camera.

2Insert the SD or SDHC memory card into the card slot with the metallic part facing the front of the camera.

3Close the compartment.

Note: To remove the card, gently push the card until it pops out. Carefully pull out the card, then close the compartment.

Turning the power on and off

1Press and holduntil the Insignia startup image appears. The zoom lens extends, and if sounds are turned on, a startup sound plays.

2Pressagain to turn the camera off.

3