PLAY MODES
Every time the MODE Button is pressed, the corresponding mode appears in the display window.
REPEAT MODE
Shown on the LCD display. The current track on the disc will be repeated.
Shown on the LCD display. All tracks on the disc will be repeated.
Return to normal play. In nor- mal mode, none of the above symbols are shown in the display.
NORMALPLAYBACK
Play the whole disc.
INTRO SCAN AND PROGRAMMED TRACK PLAY
INTRO
Plays the first 10 seconds of each track on the disc. 1. Press the MODE/ST/MONO button until “INTRO”
text appears and flashes on the display.
2. Press the PLAY/PAUSE button. The “INTRO” text will stop flashing and start playing “INTRO” scan from first track to the last track on the disc.
PROGRAM
This allows selected tracks on the disc to be played in any desired order.
To set the programmed play
Programming can be set in the STOP mode or normal play mode.
1.Press the PROGRAM button twice when the unit is in the stop mode or normal play mode. PROGRAM
shows in the display. The track number indicator appears in the display.
2.Press the SKIP DOWN botton or SKIP UP button to select the desired track.
3. Press the PROGRAM button to enter the track in the memory.
4.Repeat step 2 and 3 to program the order of add- itional tracks. Up to 20 tracks can be programmed into the memory.
5.Press the PLAY/PAUSE button to start the pro- grammed play.
6.To erase the programming, simply press the STOP button twice. (Programmed tracks can also be erased by power off or opening the lid)
7.To repeat program playback, select REPEAT ALL (for full program) or REPEAT 1 (for desired track)by pressing the PROGRAM button while play- ing the program.
8 | 9 |
