Insignia NS-13SGAM Step 9: Install the skirts

15
47” ESPRESSO GAMING TV STAND
www.insigniaproducts.com
Step 9: Install the skirts
1Insert a metal pin (HH) into each end of the front skirt (K).
2Align the front skirt (K) to the front edge of the bottom (G), then insert the ends of the metal pins into the feet (R
and S). Make sure that the finished edges face up and toward the front.
3Fasten the side skirts (L) to the bottom (G) by inserting two black 9/16" large head screws (NN) through each
corner bracket (CC). Tighten the screws.
HH
NN NN
CC
NN NN
NN NN
CC
CC
NN NN
CC
NN NN
CC
Holes should be here
Finished edge
Unfinished
edge
You’ll need:
Phillips screwdriver
HH (2) NN (8)
NT-13SGAM_14-0248_MAN_V1_ENG.fm Page 15 Thursday, May 1, 2014 11:22 AM