5
www.insigniaproducts.com

Inputs (both models)

Outputs (both models)

Audio (both models)

Power

Miscellaneous (both models)

Legal notice s

FCC Part 15

This device complies with Part15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within the limits for
a class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC warning

Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the user’s
authority to operate this equipment.

Cables

Connections to this device must be made with shielded cables with
metallic RF/EMI connector hoods to maintain compliance with FCC Rules
and Regulations.

Canada ICES-003 statement

This Class B digital apparatus complies with Canadian ICES-003.
Standard Television Receiving Apparatus — Appareil de réception
télévision ordinaire, Canada BETS-7 / NTMR-7

Dolby License Notice and Trademark Acknowledgement

Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.

HDMI

HDMI, the HDMI logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.

Energy Star

To meet Energy Star requirements, keep TV settings at the
factory default settings.
HDMI
2 (side)
HDMI 1 (DVI) (1.3), HDMI 2 (ARC) (1.4)
E-EDID compliant
HDCP compliant
Component video 1 (side)
Composite video 1 (side)
Shared audio (component
and composite) Yes
S-Video No
PC/VGA 1 (back)
3.5mm PC audio input 1 (back)
USB 1 (side)
Support JPEG and firmware upgrade
Video No
Analog audio/headphone 1 (back)
Digital audio 1 coaxial (back)
WiFi No
Ethernet No
Speakers Number: 2
Watts per channel: 3W
NS-19E320A13 NS-22E340A13
Power consumption On: 26 W
Standby: <1W
On: 34W
Standby: <1W
Power input 120V/60Hz 120V/60Hz
OSD languages English, French, Spanish
INlink Yes
Game Mode No
ENERGY STAR qualified Yes
Internet connectable No
TV base screws M4 type (14 mm length) (4 pcs)
V-Chip (version 2.0) Yes
Sleep timer Yes
Channel labeling Yes
VESA mount (mm)
(horizontal× vertical) 100×100
Note
The length of the wall-mount screws vary depending
on the wall-mount bracket you purchased. See the
instructions that came with the wall-mount bracket
for screw lengths.