Insignia
Connecting a DVD player using component video
Warning
Make sure that you turn off and unplug your TV before installing devices.
To connect a DVD player using component video:
1Plug the Y, Pb, and Pr connectors on a component video cable into the Y, Pb, and Pr IN jacks on the back of your TV.
Y=yellow (video)
W=white (audio left)
R=red (audio right)
2Plug the other ends of the cable into the Y, Pb, and Pr OUT jacks on the DVD player. The jacks on the DVD player may be labeled Y, Cb, and Cr.
3Plug the right (red) and left (white) connectors on a standard audio/video cable into the right (red) and left (white) COMPONENT IN audio jacks on the back of your TV.
4Plug the audio connectors on the other end of the audio/video cable into the audio OUT jacks on the DVD player.
To play a DVD:
1Turn on your TV.
2Press the INPUT button one or more times to select YPbPr.
3Turn on the DVD player.
4Insert a DVD disc, then press the Play button.
Connecting a PC
To connect a PC:
1Plug a
Audio
2Plug the other end of the
3Plug an audio cable into the
4Plug the other end of the audio cable into the audio out jack on the computer.
To view the computer screen on your TV:
1Turn on your TV.
2Press the INPUT button one or more times to select
3Turn on your computer, and check your computer system requirements. See your computer documentation for more information.
4Adjust the screen resolution and other settings on your computer, if necessary.
Using your TV
Turning your TV on and off
To turn your TV on and off:
1Make sure that the power cord is connected to your TV and an electrical outlet.
2Press the 
button to turn on your TV.
3Press the 
button again to turn off your TV.
Selecting the TV source
To select the TV source:
1Press the MENU button to open the
2Press the CH+ or CH– button one or more times to select Channel.
10 |