To finalize a disc, refer to “Disc Settings” on page 15.

Notes

Unfinalized DVD+RWs are playable on regular DVD players.

The edited contents of a DVD+RW disc is compatible with regular DVD players only after finalization.

The edited contents of a DVD+R disc is not compatible with regular DVD players. (Hide, chapter combine, added chapter mark, and so on.)

How long finalization takes depends on the type of disc being finalized, how much is recorded on the disc, and the number of titles on the disc.

Reference

Controlling your TV with the supplied universal remote control

You can control the sound level, input source, and power switch of your LG TV with the supplied universal remote control.

You can control your TV using the following buttons.

Press

To...

POWER

Turn the TV on or off

AV/INPUT

Switch the TV’s input source between the TV

 

and other input sources.

PR/CH +/–

Scan up or down through memorized channels

VOL +/–

Adjust the volume of the TV

Note

Depending on the you are connecting, you may not be able to control your TV using some of the buttons.

Controlling other TVs with the universal remote control

You can control the sound level, input source, and power switch of non-LG TVs as well. Enter the appropriate manufacturer code from the table below.

To enter the manufacturer code:

1While holding down the TV POWER button, press the number buttons to select the manufacturer code for your TV (Refer to table).

2Release the TV POWER button. The remote control is set to control the TV.

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer

Code #

LG (GOLDSTAR)

1 (default), 2

Zenith

1,3,4

Samsung

6,7

Sony

8.9

Hitachi

4

Note

•Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code.

•If you enter a new code number, the code number previously entered will be erased.

•When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.

Language code list

Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.

Language

Code #

Language

Code #

Abkhazian

6566

Lingala

7678

Afar

6565

Lithuanian

7684

Afrikaans

6570

Macedonian

7775

www.insignia-products.com

27