3
20” Widescreen LED Monitor
www.insigniaproducts.com
Using the on screen display (OSD)
To use the on screen display (OSD) menus:
1Press the MENU button to open the menus. The
Main Menu opens.
2Press or to select a menu item, then press
OK to go to that sub-menu. You can select:
•Auto Image Adjust–automatically adjusts
Horizontal Position, Vertical Position, Phase
(Fine Tune) and Clock (H.Size) of the screen
(available only with VGA cable (analog)
connections)
• Contrast/Brightness
•Contrast
•Brightness
•Backlight
•Input Select
• Color Adjust
•Warm-Emphasis on the red end of the
spectrum.
•Normal- No emphasis.
•Cool-Emphasis on the blue end of the
spectrum.
•User Color–to manually adjust the color
levels. Press OK to select the color to
adjust.
•Information–to display information on the
current input signal.
• Manual Image Adjust
• Horizontal Size
•H./V. Position
•H. Position
•V. Position
•Fine Tune–to fine tune the phase and
clock.
•Sharpness–to adjust the clarity of a
non-WXGA+ (1600x900) image.
•Video Mode Adjust–select Full Screen,
Over Screen, or Aspect Ratio.
•Color Vision Mode–to select a preset
display environment. You can select
Standard, Game, Cinema, Scenery, Text,
or ECO.
•Setup Menu
• Language S elect
•OSD Position
•H. Position
•V. Position
•OSD Time Out–to automatically turn off
the OSD after a preset period of time.
•Memory Recall–to reset all settings to factory
default. Press OK.
3When the sub-menu opens, press or to
go to the item you want to adjust, then press OK
to select that item.
4Press or to adjust the item you selected,
then press MENU to exit the menu.
Maintaining

Care

• Avoid exposing your monitor to direct sunlight or
other heat source. Place your monitor away from
the sun to reduce glare.
• Put your monitor in a well ventilated area.
• Do not place any heavy things on top of your
monitor.
• Make certain your monitor is installed in a clean
and moisture-free area.
• Keep your monitor away from magnets, motors,
transformers, speakers, and TV sets.

Safety Tips

• If smoke, abnormal noise, or odor came out of
your monitor, you should remove th e power cord
immediately and call your service center.
• Never remove the back cover of your monitor
cabinet. The display unit inside contains
high-voltage parts and may cause an electric
shock.
• Never try to repair your monitor yourself. Always
call your service center or a qualified technician to
fix it.
Troubleshooting

Troubleshooting questions

How do I connect my monitor to two computer
systems?
1Connect the power cord to the monitor, then to
a properly grounded AC outlet.
2Make sure that the monitor and both computers
are turned OFF. Connect the included VGA cable
to the VGA output jack on one of the computers,
then to the VGA input jack on the monitor.
3Connect a DVI cable (not included) from the DVI
output jack on the other computer to the DVI
input jack on the monitor.
OR
If your PC has an HDMI output, you can use an
HDMI to DVI cable (not included).
4Turn ON your computers and monitor. The
monitor's blue power LED turns ON.
MENU: Exit OK: Select
NS-20EM50A13_12-0349_MAN_V1_EN.book Page 3 Wednesday, July 18, 2012 11:38 AM