5
24” Widescreen LED Monitor
www.insigniaproducts.com
• Manual Image Adjust
•H./V. Position–Adjusts the horizontal (H)
and vertical (V) position of the picture on
the monitor screen.
•H. Position
•V. Position
•Clock–to set the clock.
•Phase–to fine tune the phase.
•Sharpness–to adjust the clarity of a
Full-HD (1920x1080) image.
•Video Mode Adjust–select Full Screen or
Aspect Ratio.
•Color Vision Mod e–to select a preset
display environment. You can select
Standard, Game, Cinema, Scenery, Text,
or ECO.
•Setup Menu
• Language Selec t
•OSD Position–adjust the horizontal (H)
and vertical (V) position of the OSD menu
on the screen.
•H. Position
•V. Position
•OSD Time Out–to automatically turn off
the OSD after a preset period of time.
•Memory Recall–to reset all settings to factory
default. Press OK.
Maintaining

Care

• Avoid exposing your monitor to direc t sunlight or
other heat source. Place your monitor away from
the sun to reduce glare.
• Put your monitor in a well ventilated area.
• D o not place any heavy things on top of your
monitor.
• M ake certain your monitor is installed in a clean
and moisture-free area.
• Keep your monitor away from magnets, motors,
transformers, speakers, and TV sets.

Safety Tips

• I f smoke, abnormal noise, or odor came out of
your monitor, you should remove the power co rd
immediately and call your service center.
• Never remove the back cover of your monitor
cabinet. The display unit inside contains
high-voltage parts and may cause an electric
shock.
• Never try to repair your monitor yourself. Always
call your service center or a qualified technician to
fix it.
Troubleshooting

Troubleshooting questions

How do I connect my monitor to two computer
systems?
1Make sure that the monitor and both computers
are turned off. Connect the included VGA cable
to the VGA output jack on one of the computers,
then to the VGA input jack on the monitor.
2Connect an HDMI cable (not included) from the
HDMI output jack on the other computer to the
HDMI input jack on the monitor.
-OR-
If your PC has a DVI output, you can use a DVI
cable (not included).
3Connect the power cord to the monitor, then to
a properly grounded AC outlet.
4Turn on your computers and monitor. The
monitor's blue power LED turns on.
5Use the OK button on your monitor to select the
input corresponding to the computer you
would like to see the display from.
How do I connect two monitors to one computer
system?
1Make sure that both monitors and the computer
are turned off.
2Connect a VGA, DVI, or HDMI cable to the
computer then to the first monitor.
3Connect a VGA, DVI, or HDMI cable to the
computer then to the second monitor.
4Connect the power cord to both monitors, then
to properly grounded AC outlets.
5Turn on your computer and monitors. The
monitor's blue power LED turns on.
6You will need to choose if you would like your
screen to be a duplication of the other monitor
or and extension. See the troubleshooting
question “How do I extend my display to a
second monitor?“ and “How do I duplicate my
screen to a second monitor?“ for instructions.
How do I extend my display to a second
monitor?
Windows 8 or Windows 7:
1Go to your desktop.
2Right-click on your desktop, then click Screen
resolution.
Note
You may also need to set the resolution and refresh
rate on both computers (example: 1920 x 1080 @
60 Hz).
Note
Your computer/graphics card must have the
capability to support dual-monitor display. See the
instructions that came with your computer/graphics
card.
Note
You may also need to set the resolution and refresh
rate (example: 1920 x 1080 @ 60 Hz).
NS-24EM51A14_12-0730_MAN_V1_EN.book Page 5 Wednesday, September 4, 2013 2:44 PM