20
NS-32D20SNA14 Insignia 32" LED TV
www.insigniaproducts.com
Using composite video (good)
To connect a DVD or Blu-ray player using composite video:
1Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2Connect an AV cable (not provided) to the AV/COMPONENT IN VIDEO/Y jack and L and R AUDIO jacks on the
back of your TV and to the AV OUT jacks on the DVD or Blu-ray player.
3Plug your TV’s power cord into a power outlet, then turn on your TV.
4Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5Press INPUT to open the INPUT SOURCE list.
6Press S or T to select Component/AV, then press ENTER.
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
AV/COMPONENT IN VIDEO/Y jack.
Note
•The AV/COMPONENT IN VIDEO/Y, PB, and PR video jacks (used to
connect a component device) share the L and R AUD IO jacks with the
AV/COMPONENT IN VIDEO/Y jack (used to connect a composi te
device).
• When you connect the audio using the Land R AUDIO jacks, the audio
output is analog.
AV cabl e
(composite video cable)
Back of TV
Composite
video cable
connector
Composite
video jack
Analog audio
cable
connectors
Analog
audio jacks
DVD or Blu-ray player
On your TV