76
Insignia 32" LED TV
www.insigniaproducts.com
General
Problem Solution
No power. Make sure that the AC power
adapter is correctly connected
to your TV and a power outlet.
Unplug the AC power adapter,
wait 60 seconds, then plug the
cord back in and turn on your
TV.
Other devices (for example, a
surround sound receiver,
external speakers, fans, or hair
dryers) may be inter fering with
your TV. Try turning off one
device at a time to determine
which device is causing
interference. After you have
determined which device is
causing interference, move it
further from the TV to eliminate
the interference.
“No signal”
error message is
displayed.
Press INPUT and make sure tha t
you have selected the correct
input for the device or service
you are trying to use.
If you are using a cable or
satellite box, use the remote
that came with that box to
change channels.
Make sure that you have the
correct input selected to view
channels from the cable or
satellite box.
After Auto
Channel Search,
there are no
channels.
Reception can vary by channel
depending on the broadcast
power level of a given station.
Contact your cable or satellite
TV provider.
Make sure that the antenna or
cable/satellite TV is connected
securely to your TV.
Try replacing the cable between
the antenna/cable or
cable/satellite box and your TV.
When I press
INPUT, I cannot
select my
device (it is
grayed out).
Turn on the device. Your TV
automatically detects and
displays which video jacks have
devices connected to them
when the devices are turned on.
Turn off Auto Input Sensing. See
Turn Input Sensor on or off” on
page 70.
One or more
channels do not
display.
Make sure that the channels are
not blocked. See “Set parental
control levels” on page63.
Make sure that the channels are
not hidden. The channel may
have been deleted from the
channel list. You can tune to the
channel by pressing the
number buttons or you can add
the channel back to the channel
list. See “Hide channels” on
page 59.
If you are using a cable or
satellite box, use the remote
that came with that box to
change channels.
Make sure that you have the
correct input selected to view
channels from the cable or
satellite box.
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
Check the digital signal
strength” on page60.
Password is lost. •Enter 9999 to access parental
controls, then set a new
password. See “Set or change
the password” on page61.
Some settings
cannot be
accessed.
If a setting is grayed, the setting
is not available in the current
video input mode (for example
TV mode ). Cha nge to a diffe rent
video input source. See “Select
the video input source” on
page 40.
TV cabinet
creaks. When the TV is in use, the
temperature rises naturally and
may cause the cabinet to
expand or contract which can
cause a creaking noise. This is
not a malfunction.
Control buttons
do not work. Make sure that the Button Lock
option is set to Off. See “Lock
control buttons” on page 62.
Unplug the AC power adapter,
wait a few seconds, then plug
the cord back in and turn on
your TV.
TV keeps
turning off. Make sure that the sleep timer
is not turned on. See “Set the
sleep timer” on page69.
A retail banner
is displayed. You selected “Retail Mode”
when you ran the TV setup
wizard. Reset your TV to the
factory defaults, then select
Home Use Mode on the What is
your viewing environment
screen. See “Restore settings to
the defaults” on page 71.
Problem Solution