20
Insignia 32" LED TV
www.insigniaproducts.com
Component video (better)
1Make sure that your TV’s power adapter is unplugged and the DVD or Blu-ray player is turned off.
2Connect a component video cable (not provided) to the VIDEO/Y, PB, and PR jacks on the side of your TV and to the
COMPONENT OUT jacks on the DVD or Blu-ray player.
3Connect an audio cable (not provi ded) to the AUDIO L and R jacks on the side of your TV and to the L and R AUDIO
OUT jacks on the DVD or Blu-ray player.
4Plug your TV’s power adapter into a power outlet, then turn on your TV and DVD or Blu-ray player.
5Press INPUT to open the INPUT SOURCE list.
6Press S or T to highlight Component/AV, then press ENTER.
Note
Cables are often color-coded to match color-coded jacks.
Important
•The VIDEO/Y, PB, and PR video jacks (used to connect a component
device) share the AUDIO L and R jacks with the VIDEO/Y jack (used to
connect an AV device). You can only connect one component video or
AV device at a time. We suggest upgrading to HDMI if your DVD or
Blu-ray player supports it.
When you connect the audio using the AUDIO L and R jacks, the audio
output is analog.
Side of TV
Audio cable
Component video cable
DVD or Blu-ray
player
Component
video cable
connectors
Audio cable
connectors
Component
video jacks
Analog
audio jacks
On your TV