13
NS-32D511NA15 Insignia 32" LED TV
www.insigniaproducts.com
DVI (same as HDMI but requires an audio connection)
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the cable or satellite box.
4Connect the other end of the cable to the HDMI jack on the side or back of your TV.
5Connect an audio cable (not provided) to the DVI AUDIO IN jack on the back of your TV and to the AUDIO OUT
jacks on the cable or satellite box.
6Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7Press INPUT to open the INPUT SOURCE list.
8Press S or T to highlight HDMI1 or HDMI 2, then press ENTER.
Note
You can use either HDMI jack to connect a cable or satellite box using DVI.
Note
When you connect the audio using the DVI AUDIO IN jack, the audio output
is analog.
Cable or
satellite box
HDMI cable with
HDMI-DVI adapter
Audio cable
Back of TV
HDMI cable
connector
Audio cable
connector
HDMI jack DVI AUDIO
IN jack
On your TV