15
Insignia 32" LED TV/DVD Combo
www.insigniaproducts.com
Component video (better)
1Make sure that your TV’s AC power adapter is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect a component video cable (not provided) to the VIDEO/Y, PB, and PR jacks on the side of your TV and
the component video out jacks on the cable or satellite box.
4Connect an audio cable (not provided) to the LandR AUDIO jacks on the side of your TV and to the audio out
jacks on the cable or satellite TV box.
5Plug your TV’s AC power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box.
6Press INPUT to open the INPUT SOURCE list.
7Press S or T to highlight Component/AV, then press ENTER.
Note
Cables are often color-coded to match color-coded jacks.
Notes
•The VIDEO/Y, PB, and PR video jacks (used to connect a component
device) share the L and R AUDIO jacks with the VIDEO/Y jack (used to
connect an AV (composite video) device).
When you connect the audio using the L and R AUDIO jacks, the audio
output is analog.
Audio cable
Cable or
satellite box
Component video cable
Side of TV
Component
video cable
connectors
Audio cable
connectors
Analog
audio jacks
Component
video jacks
On your TV