19
Insignia 32" 1080p LED TV
www.insigniaproducts.com

Connecting a home theater system with

multiple devices

The connections you make depend on the video
and audio jacks available on your devices. Refer to
the documentation that came with your devices for
connection information.
Just remember to use the best connection types
available for the best picture and sound. For
information about connection types, see “What
connection should I use?” on page8.
Using the remote control

Installing remote control batteries

To install remote control batteries:
1While pressing the release latch on the back of
the remote control, lift the battery
compartment cover off the remote control.
2Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3Replace the battery compartment cover.

Aiming the remote control

To aim the remote control:
• Point the remote control towards the remote
sensor on the front of your TV.
Blu-ray player/DVD player/VCR Cable/satellite box
AV receiver
Camcorder/game console
USB flash drive
Computer
Antenna or cable
TV connected
directly to the
wall jack
Cautions
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not go ing to be used for
an extended period of time, remove the
batteries.