
22
NS-32E440A13 Insignia 32" 1080p LED TV
www.insigniaproducts.com
12 To watch TV, press INPUT, press S or T to
highlight the video input source for your TV in
the INPUT SOURCE list, then press ENTER.
• If your TV is connected to an antenna, cable T V
(no box), or cable or satellite TV box using a
coaxial cable, select TV.
• I f your TV is connected to a c able or satellite
box using an HDMI cable or HDMI cable with a
DVI adapter, select HDMI1, HDMI2, or HDMI3.
• I f your TV is connected to a c able or satellite
box using a component video cable, select AV.
• I f your TV is connected to a c able or satellite
box using a composite video cable, select AV.
Understanding the basicsTurning your TV on or off
To turn your TV on or off:
1Make sure that t he power cord is connect ed to a
power outlet.
2Press (power) to turn on your TV. The power
indicator turns off.
3Press (power) again to turn off your TV. Your
TV enters standby mode, and the power
indicator LED turns red.
Selecting the video input source
To select the video input source:
1Turn on your TV, then press INPUT. The INPUT
SOURCE list opens.
2Press S or T to select a video input source, then
press ENTER.
You can also press a Quick Launch Input button to
select the video input source.
• Press TV to select TV (if your TV is connected to
an antenna, cable TV (no box), or cable or satellite
TV using a coaxial cable).
• Press VIDEO to select component or composite
input.
•Press HDMI one or more times to cycle between
the HDMI inputs.
On-screen menu overview
PICTURE menu (TV mode)
AUDIO menu ( TV mod e)
Warning
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug th e
power cord.
Note
If your TV does not receive an input signal for several
minutes, it automatically goes into standby mode.
INPUT SOURCE
TV
AV
HDMI1
HDMI2
HDMI3
VGA
USB(Photos)
Note
Component and composite video devices share the
video and audio jacks. When a device is connected,
your TV detects the type of connection.
If a composite device is connected, AV appears in the
INPUT SOURCE list.
If a component device is connected, Component
appears in the INPUT SOURCE list.
Notes
• Depending on the signal source selected, you
may see different options on your screen. The
following menus are shown in TV mode (except
the Photos menu).
• Menu items that are not selectable are grayed
out.
• Menus in this manual ar e described i n TV mode,
unless otherwise indicated.
• The screens shown in this manual are for
explanation purposes and may vary from the
actual screens on your TV.
Adjust settings to affect picture quality
MENU EXIT
OK
ENTER
Picture
Picture Mode
Brightness
Contrast
Color
Advanced Video
Reset Picture Settings
Energy Savings
44
55
75
MOVE SELECT PREVIOUS EXIT
MENU EXIT
OK
ENTER
PICTURE CHANNELS SETTINGS PHOTOSAUDIO
Adjust settings to affect sound quality
MENU EXIT
OK
ENTER
Audio
Sound Mode
Balance
Advanced Audio
Reset Audio Settings
Standard
0
MOVE SELECT PREVIOUS EXIT
PICTURE CHANNELS SETTINGS PHOTOSAUDIO