44
NS-39D40SNA14 Insignia 39" LED TV
www.insigniaproducts.com
•MTS/SAP—(Analog channels only) Selects the
audio mode. You can select:
•Mono—Select this option if there is noise
or static on weak stereo broadcasts.
•Stereo—Select this option for programs
broadcast in stereo.
•SAP—Select this option to listen to a
secondary audio program, if available.
•Audio Languag e—(Digital channels only)
Selects an alternate audio language, if
available.
•Headphone/Audio Out—You can use the
/AUDIO OUT jack on the side of your TV to
connect headphones, an amplifier, a home
theater system, or a sound bar. When a device
is connected to the /AUDIO OUT jack, the
TV speakers are muted. This option selects
where the audio is played. You can select:
•Headphone—Select this option if you
connected headphones.
•Audio Out Fixed— Select this option to
use the remote control that came with the
amplifier, home theater system, or sound
bar you connected to the /AUDIO OUT
jack to control the audio.
•Audio Out Variable—Select this option to
use the remote control that came with
your TV to control the audio from the
amplifier, home theater system, or sound
bar you connected to the /AUDIO OUT
jack.
This option is only available when a device is
connected to the /AUDIO OUT jack.
•Reset Audio Settings—Reset all audio
settings to factory defaults.
4Press W or X to adjust the option, or press S or
T to select a setting.
5Press MENU to return to the previous menu, or
press EXIT to close the menu.
Selecting the audio out mode
If your TV is on when you connect a device to the
/AUDIO OUT jack on the side of your TV, a screen
opens where you select which audio out mode you
want to use.
To select the audio out mode:
1Connect headphones, an amplifier, a home
theater system, or a sound bar to the /AUDIO
OUT jack on the side of your TV. The following
screen opens.
2Press W or X to highlight the audio out mode
you want to use, then press ENTER. You can
select:
•Headphone—Select this option if you
connected headphones.
•Audio Out Fixed— Select this option to use
the remote control that came with the
amplifier, home theater system, or sound bar
you connected to the /AUDIO OUT jack to
control the audio.
•Audio Out Variab le—Select this opti on to
use the remote control that came with your T V
to control the audio from the amplifier, home
theater system, or sound bar you connecte d to
the /AUDIO O UT jack.
Playing TV audio only
You can turn off the picture on your TV and listen to
the program audio only.
To pl ay T V a udi o o nly :
1Press MENU. The on-screen menu opens.
2Press W or X to highlight CHANNELS, then press
T or ENTER. The CHANNELS menu opens.
3Press S or T to highlight Audio Only, then
press ENTER.
4Press S or T to select On.
5Press MENU to return to the previous menu, or
press EXIT to close the menu.
Note
You can also press MTS/SAP one
or more times to select the
audio mode.
Notes
• The picture turns off in about five
seconds.
•Audio Only works only when the
input source is TV, and your TV is
receiving a broadcast signal.
• To exit audio only mode, press any
button. When you exit audio only
mode, the Audio Only option is
automatically reset to Off.