18
NS-40D40SNA14 Insignia 40" LED TV
www.insigniaproducts.com
Connecting a DVD or Blu-ray player
Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see “What connection should I use?” on page11.
Using HDMI (best)
To connect a DVD or Blu-ray player using HDMI:
1Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2Connect an HDMI cable (not provided) to one of the HDMI jacks on the side or back of your TV and to the
HDMI OUT jack on the DVD or Blu-ray player.
3Plug your TV’s power cord into a power outlet, then turn on your TV.
4Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5Press INPUT to open the INPUT SOURCE list.
6Press S or T to highlight HDMI1, HDMI 2, or HDMI 3, then press ENTER.
Side of TV
HDMI cable
DVD or Blu-ray player
HDMI cable
connector
HDMI jack
On your TV