11
Insignia 46"/55" 1080p LED TV
www.insigniaproducts.com
Using DVI (same as HDMI but requires a sound
connection)
To connect a cable or satellite box using DVI:
1Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4Connect the other end of the cable to the
HDMI1/DVI jack on the side of your TV.
5Connect a 3.5mm audio cable (not provided) to
the PC/DVI AUDIO IN jack on the side of your
TV and to the AUDIO OUT jacks on the cable or
satellite box.
6Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7Go through the Setup Wizard on page 21.
Using component video (better)
To connect a cable or satellite box using
component video:
1Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3Connect a component video cable (not
provided) to the COMPONENT/AV Y/VIDEO, PB,
and PR video jacks on the back of your TV and
the component video out jacks on the cable or
satellite box.
4Connect an audio cable (not provided) to the
Land Raudio jacks on the back of your TV and
to the audio out jacks on the cable or satellite TV
box.
5Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6Go through the Setup Wizard on page21.
Note
You must use the HDMI1/DVI jack to connect a
cable or satellite box using DVI. If you use another
HDMI jack, you will not hear sound from the TV
speakers.
Note
When you connect the audio using the PC/DVI
AUDIO IN jack, the audio output is analog.
Cable or satellite box
HDMI cable with HDMI-DVI adapter
3.5mm audio cable
Side of TV Note
•The COMPONENT /AV Y/VI DEO, Pb, and Pr
video jacks (used to connect a component
device) share the LandR audio jacks with the
COMPONENT/AV Y/VIDE O jack (used to
connect a composite device).
When you connect the audio using the LandR
audio jacks, the audio output is analog.
Y / VIDEO
P
B
P
R
L R
Audio cable
Cable or satellite box
Cables are often
color-coded to match
color-coded jacks.
Component video cable
Back of TV