Insignia 40"/46"
Connecting an analog (stereo) sound system | 3 Press or to highlight the language you |
To connect an analog (stereo) sound system: | want, then press . The Choose your Picture |
Mode screen opens. | |
1 Make sure that your TV’s power cord is |
|
unplugged and the sound system is turned off. | Please choose your picture mode |
|
2Connect an analog audio cable to L/R OUT jacks on the side of your TV and to the L/R audio in jack on the analog sound system.
Back of TV
Analog sound system
Turning on your TV for the first time
The first time you turn on your TV, the Setup Wizard opens. The Setup Wizard guides you through setting up basic settings including the menu language, TV signal source, and the channel list.
To set up your TV:
1Make sure that you have:
•Installed the remote control batteries. (See page 7 for details).
•Connected an antenna, cable TV, or satellite TV. (See page 9 for details.)
•Connected the power cord. (See page 9 for details.)
2Press POWER on the remote control to turn on your TV. The Choose your menu Language screen opens.
Home Mode
Retail Mode
Move ENTER Select MENU Previous EXIT Exit
Reduce total power consumpiton.
4Press 
or 
to highlight Home Mode or Retail Mode, then press ENTER.
Home Mode reduces total power consumption.
If you selected Retail Mode, a message appears “If you select Retail Mode, then Energy saving is not realized.” Select Yes to continue, or select No to change your selection.
The Choose your TV source screen opens.
5Press 
or 
to highlight Antenna or Cable, then press ENTER. Your TV automatically starts scanning for channels available in your viewing area.
Note
You can press EXIT to stop the auto channel search, but you will need to run the auto channel search again to create a channel list.
Understanding the basics
Note
Unless otherwise noted, all tasks in this section are based on using the remote control.
Turning your TV on or off
To turn your TV on or off:
1Make sure that the power cord is connected to a power outlet.
2Press POWER to turn on your TV. The power indicator LED blinks red, then turns off.
www.insigniaproducts.com | 13 |