14
NS-46L400NA14 Insignia 46" LCD TV
www.insigniaproducts.com
Using composite video (good)
To connect a cable or satellite box using composite video:
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect an AV cable (not provided) to the COMPONENT IN/AV IN VIDEO/Y jack and L and R AUDIO jacks on
the side of your TV and to the composite video and audio out jacks on the cable or satellite box.
4Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5Press INPUT to open the INPUT SOURCE list.
6Press S or T to select Component/AV, then press ENTER.
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
COMPONENT IN/AV IN VIDEO/Y jack.
Notes
•The COMPONENT IN/AV IN VIDEO/Y, PB, and PR video jacks (used to
connect a component device) share the L and R AUD IO jacks with the
COMPONENT IN/AV IN VIDEO/Y jack (used to connect a composite
device).
• When you connect the audio using the Land R AUDIO jacks, the audio
output is analog.
Cable or
satellite box
AV cabl e
(composite video cable)
Side of TV
Composite
video cable
connector
Composite
video jack
Analog audio
cable
connectors
Analog
audio jacks
On your TV