14
NS-50D40SNA14 Insignia 50" LED TV
www.insigniaproducts.com
Using composite video (good)
To connect a cable or satellite box using composite video:
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect an AV cable (not provided) to the COMPONENT I N/AV IN Y/ VIDEO jack and L and R AUD IO jacks on
the back of your TV and to the composite video and audio out jacks on the cable or satellite box.
4Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5Press INPUT to open the INPUT SOURCE list.
6Press S or T to highlight Component/AV, then press ENTER.
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
COMPONEN T IN/AV IN Y /VIDEO jack.
Notes
•The COMPONE NT IN/AV IN Y/VIDEO, PB, and PR video jacks (used to
connect a component device) share the L and R AUD IO jacks with the
COMPONEN T IN/AV IN Y /VIDEO jack (used to connect a composite
device).
• When you connect the audio using the Land R AUDIO jacks, the audio
output is analog.
Cable or
satellite box
AV cab le
(composite video cable)
Back of TV
Composite
video cable
connector
Composite
video jack
Analog audio
cable
connectors
Analog
audio jacks
On your TV