Using your adapter
Warning: If your device does not work, immediately unplug
the adapter, then check the voltage and polarity settings. Do
not attempt to charge multiple devices at the same time
through the tip and USB connections.
• Connect the adapter to your device, then connect it
to a power outlet. Use or charge your device as usual.
OR
• Connect a USB charging cable from the adapter to
your device, then connect the adapter to a power
outlet. Use or charge your device as usual.
Troubleshooting
My device isn’t working.
• Immediately unplug the adapter.
• Check the polarit y of your adapter and make sure it
matches the polarity of the device you want to
charge.
• Make sure that your device requires less than
1300mA (1.3A) of current (or 2100mA (2.1A) for 5V
connection).
• Make sure that the voltage selector is set to the
correct voltage.
• Make sure that you have selected the correct tip.
• D o not connect a device to the USB port and tip at
the same time.
My adapter is hot.
• It is normal for an adapter to feel warm during use.
Make sure that it is placed in a well-ventilated area.
• If your adapter feels abnormally hot, check your
adapter’s settings and make sure that it is
compatible with your device.
Specications
• Input: 120V AC
• Output: 3, 4.5, 6, 7.5, 9, or 12V DC 1300mA, or 5V
DC 2.1A
V1 ENGLISH 14-0200
Legal notices
FCC Statement
Caution: Changes or modications not expressly approved
by the part responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Canadian Notice
CAN ICES-3 B/NMB-3 B
One-year limited warranty
Visit www.insigniaproducts.com for details.
Contact Insignia:
For customer service, call 1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China