NS-B2111 Bookshelf Speakers

Setting up your bookshelf speakers

To connect your speakers to your amplifier:

1Loosen the screw-type knobs on the back of your speaker.

2Remove 0.5” (10 mm) of insulation from the speaker cable.

3Insert the bare wire into the opening at the base of the speaker knob.

4Tighten the knob.

5Connect the + terminal of the speaker to the + terminal of the amplifier. Repeat for the - terminal.

6Test the security of the connection by tugging lightly on the cable at the terminal.

7Repeat steps 1-6 for the second speaker.

Caution: Do not let the bare speaker wires touch each other, this could damage the speaker and amplifier.

Note: Make sure that each + terminal of the amplifier is correctly connected to the + terminal of the appropriate speaker. If this is not correct, the bass components will not be clear. Correctly connected speakers will give you a stable, well-defined stereo output with a clear, powerful bass sound.

2www.insignia-products.com