Setting the sleep timer
To set the sleep timer:
1Press the Sleep button. The radio turns on, plays the last tuned station, and “30” displays.
2Select the time (5 to 30 minutes) by repeatedly pressing the Sleep button. The Sleep/Alarm/Snooze indicator turns on until the radio turns off at the preset time.
3Cancel Sleep mode by pressing the Power Off/Alarm Off button.
Using the alarm
You can set up to two alarm times. The radio must be turned off while setting the alarm times.
SETTING THE ALARM
To set the alarm:
1Press the Alarm 1 Set or Alarm 2 Set/Store button. The Alarm 1 or Alarm 2 indicator turns on and the hour number flashes.
2Turn the Up/Down knob to adjust the hour until the hour number you want displays. (Turning and holding the knob for more than three seconds increases the adjustment speed.)
3Press the Alarm 1 Set or Alarm 2 Set/Store button again. The Alarm 1 or Alarm 2 indicator and the minute number flash.
4Turn the Up/Down knob to adjust the minute until the minute number you want displays.
5Press the Alarm 1 Set or Alarm 2 Set/Store button to confirm your settings and go back to clock mode.
6Turn the Alarm 1 Radio/Buzzer/Off or Alarm 2 Radio/Buzzer/Off switch to Radio or Buzzer. The Alarm 1 or Alarm 2 indicator turns on. The Sleep/Alarm/Snooze indicator flashes while Alarm 1 or Alarm 2 is active.
7Press the Power Off/Alarm Off button to stop the alarm.
8Turn the Alarm 1/Radio/Buzzer/Off or Alarm 2/Radio/Buzzer/Off switch to Off. The Alarm 1 or 2 indicator turns off and Alarm 1 or 2 is switched off.
Note | If the two alarm times are the same, only Alarm 1 will |
| sound at the alarm time. If the two alarm times are close, |
| the first alarm will stop when the second one sounds. |
|
|
Using snooze
To use snooze:
When the alarm sounds, press the Snooze button. The alarm stops and the Alarm/Sleep/Snooze indicator flashes. After about eight minutes, the alarm sounds again.
4www.Insignia-Products.com