Insignia NS-CADVD Maintaining, Troubleshooting, Cleaning the cabinet, Handling discs, Cleaning discs

Insignia NS-CADVD DVD Player

Maintaining		Problem	Solution
Cleaning the cabinet		Disc does not play	• Make sure that a disc is in the
			disc tray.
Use a soft cloth slightly moistened with a mild			• Make sure that the disc label
detergent solution. Do not use a solution			is facing up.
			• Make sure that the region
containing alcohol, spirits, ammonia, or abrasive
			code on the disc matches
cleaners. They may damage the cabinet.
			your player’s region code.
Handling discs			The disc’s region code should
			be on the disc or the disc
• To keep a disc clean, do not touch the play			packaging. The region code
			for your player is 1.
side (non-label side) of the disc.
			• The DVD’s rating level may be
• Do not attach paper or tape to the disc.
			higher than the rating level
			your player is set up to play.
			• The disc may not be a
			supported disc. For more
			information, see “Playable
			discs” on page 2.
			• The disc may be damaged or
			dirty. Clean the disc or try
• Keep the disc away from direct sunlight or			another disc. For more
			information, see “Cleaning
heat sources.
			discs” on page 11.
• Store the disc in a disc case after you remove			• Moisture may have
it from your recorder.			condensed inside your player.
Cleaning discs			Remove the disc, then leave
			your player turned on for one
• Before playback, wipe the disc outwards from			or two hours to let the
			moisture evaporate.
the center with clean cloth.
		No picture	• Make sure that the TV is
			turned on.
			• Make sure that the TV is set
			to the correct video input
			setting. See the
			documentation that came
			with the TV.
			• Make sure that the video
Troubleshooting			cable(s) are connected
			securely. For more
			information, see the topics in
			“Setting up your player” on
Problem	Solution		page 4.
			• The disc may be damaged or
No power	• Make sure that the power		dirty. Clean the disc or try
	cord is plugged into a power		another disc. For more
	outlet.		information, see “Cleaning
	• Make sure that your player is		discs” on page 11.
	turned on.
		Picture noise or distortion	• The disc may be damaged or
			dirty. Clean the disc or try
			another disc. For more
			information, see “Cleaning
			discs” on page 11.
			• Reset the color system on the
			TV. For more information, see
			the documentation that came
			with the TV.
			• Make sure that your player is
			connected directly to the TV.
		Picture not full screen	• Make sure that you have
			selected the correct aspect
			ratio for your player. For more
			information, see “Selecting
			the TV type” on page 6.
			• Make sure that you have
			selected the correct aspect
			ratio from the DVD disc
			menu.
		General malfunction	• Unplug your player for 30
			minutes, then plug it back in
			and turn it on. Your player
			should operate normally.

www.insignia-products.com 11