Insignia ns-cl15c Troubleshooting, Changing DVD settings, Problem, Solution, On-screen Options menu

Insignia NS-CL15C 15" Combo DVD/LCD TV

Changing DVD settings

On-screen Options menu

GENERAL SETUP TV DISPLAY–Sets the aspect ratio of the TV display.

•4:3/PS (Pan and Scan - may be used with external TVs) Widescreen images are shown on the screen, but with some parts automatically cut off the ends.

•4:3/LB (Letter Box - use with internal TV) Widescreen images are shown on the screen with black bars on the top and bottom of the screen.

•16:9 (may be used with external TVs) Widescreen images fill the entire screen.

ANGLE MARK–Lets you turn the Angle option On or Off. If you set this to On, you can use the ANGLE button on the remote to select an alternate viewing angle on the DVD.

OSD Lang.–Lets you select the language for the On Screen Display (OSD).

CAPTION–Lets you turn the caption On or Off.

SCREEN SAVER–Lets you turn on the screen saver, which displays when the DVD player is idle for more than three minutes.

Hdcd–Lets you set Hdcd to "OFF","1X","2X" to switch the CD play mode between "Normal CD","HDCD with 44.1K","HDCD with 88.2K". You can play normal CDs when "HDCD" is set to off. You can play 44.1K CDs when HDCD is set to 1X, and 88.2K CDs when HDCD is set to 2X to enhance the audio quality.

Last Memory–Lets you turn the last memory option On or Off. When set to On, the DVD player remembers the chapter that you were viewing when you turn the DVD player off and starts the DVD at that chapter when you turn the DVD player back on.

PREFERENCE	PARENTAL–Lets you set Parental Controls for
(only available	watching DVDs. Initial password is 1234
when no disc is in	Options include:
the player)	•	Off
	•	1	Kid Saf
	•	2 G
	•	3	Pg
	•	4	Pg 13
	•	5	Pgr
	•	6 R
	•	7 Nc 17
	•	8	Adult

PASSWORD CHANGE–Lets you change the password used to set or change Parental Controls. The initial password is 1234. Use the number buttons to enter, then confirm the new password.

Note: If you forget your password, enter 1369.

DEFAULT–Resets all settings (except Parental Controls and the password) to factory default. Press ENTER to confirm.

Troubleshooting

Please check the following items before asking for repair service:

Problem	Solution

No picture or	Check all cable connections.
sound.	Make sure that the TV is plugged in and turned
	on.
	Make sure that electricity is available at the AC
	power outlet.

Picture is OK, but	Check the volume level and mute settings.
no sound.	Switch to another channel to determine if the
	station is the problem.

No picture	Make sure that the TV is working properly.
	Press the INPUT button to select TV input.
	Make sure the color system is set correctly.

Sound is OK, but no	Check the color control and adjust it.
color.	Check the program’s color features, because it
	may be a black and white movie.

The picture has	Make sure that the antenna is installed
overlapped images.	correctly. If not, adjust the antenna toward the
	broadcasting station.

Picture has “snow.”	Check the antenna and its connection. If there
	are problems, correct them. If all connections
	are tight, the problem may be with a faulty
	antenna or cable.
	Check whether car traffic or neon signs
	disturb the image.

Stripes on picture.	Check for interference from other electronic
	devices, such as radios and televisions, and
	keep magnetic or electronic devices away
	from the TV.

Bad stereo or SAP	Long distance from the station or interfering
sound.	radio waves can result in bad sound reception.
	If so, change the mode to Mono.

Remote control	Point the remote control at the TV’s IR sensor.
does not work.	Change the batteries in the remote control.
	Remove any obstacles between the TV’s IR
	sensor and the remote control.

Image is not clear.	Adjust the NOISE REDUCTION.

Image is not	Adjust the Horizontal or Vertical control.
centered.

Bad sound quality	Make sure that the audio output mode is set
	correctly.
	Make sure that the audio connection between
	the unit and amplifier (if used) is secure.

Disc cannot be	Make sure the disc is inserted with the label
played	facing forward.
	Clean the disc.
	Moisture has condensed in the player.
	Remove the disc and leave the player on for
	about an hour.

The player doesn’t	Disconnect the power plug for ten seconds,
operate normally	then reconnect it.
	If the problem persists, contact Insignia or
	your dealer for help.