Insignia
Programming channels into memory | Adding a channel label |
To automatically program channels into memory:
1Press MENU on the TV or remote control, then press VOL+/VOL- to display the TUNING menu.
To add a label to a channel:
1Press MENU on the TV or remote control, then press VOL+/VOL- to display the TUNING menu.
73. 12MHZ
2Press CH+/CH- to enter the TUNING menu and to highlight AUTO PROGRAM, then press VOL+ to enter the AUTO PROGRAM submenu.
73. 12MHZ
2Press CH+/CH- to enter the TUNING menu and to highlight CHANNEL LABEL, then press VOL+ to enter the menu.
3Press VOL+/VOL- to select the position and CH+/CH- to select the letters or symbols to set.
4Press MENU to confirm.
3Press VOL+ highlight YES, then press MENU to confirm your selection.
4The TV searches and memorizes all channels on the selected antenna input available in your area.
Note
If your TV is connected to cable, select CATV in the ANTENNA submenu.
5To stop the auto search, press MENU.
Displaying status information
To display status information:
•Press the DISPLAY button. Your TV displays status information, such as the channel number or signal source.
Setting the sleep timer
The sleep timer lets you select the amount of time before your TV turns off automatically.
To set the sleep timer:
•Press the SLEEP button on the remote control repeatedly until the time duration you want is shown on the screen. Options include:
•SLEEP 240 MIN
•SLEEP 180 MIN
•SLEEP 120 MIN
•SLEEP 90 MIN
•SLEEP 60 MIN
•SLEEP 45 MIN
•SLEEP 30 MIN
•SLEEP 15 MIN
•SLEEP 10 MIN
•SLEEP 5 MIN
•SLEEP 0 MIN
Viewing closed captions
To view closed captions:
•Press the CCD button to toggle the closed captions on or off.
Setting parental controls
Your TV has a
11 |