Insignia NS-CLOPP1 Using your radio

Insignia NS-CLOPP1 Digital Clock Radio with FM

www.insigniaproducts.com

3Insert the tab on the battery compar tment cover into the slot on the

battery compartment, then press the cover down unti l it clicks into

place.

To connect the AC/DC power adapter:

1Plug the small connector on the power adapte r into the DC IN jack on

the back of your radio.

2Plug the other connector on the power adapter into a power outlet.

Using your radio

To set the time:

1Press Sleep for about two seconds until the hour digits blink on

the LCD.

2Press or to increase the hour or press or to decrease the

hour.

3Press Sleep again. The minutes digits blink on the LCD.

4Press or to increase the minutes or press or to decrease

the minutes.

5Press Sleep again or wait 10 seconds to save the time setting and

exit time setting mode.

Note

If you unplug the AC/DC power adapter and the backup batteries

are dead or not installed, the time setting is lost.

Notes

“AM” or “PM” appears on the LCD to the right of the time. When

you set the time, make sure that the “AM” or “PM” displays

correctly.