Digital AM/FM Clock Radio
13
www.insigniaproducts.com
1
Press VOL –/ or VOL +/ (depending upon the
alarm you want to set). The or indicator lights up.
2
Press and hold VOL –/ (or VOL +/ ). The hour digits
will blink on the display.
3
Press TUNE / repeatedly to set the correct hour,
then press VOL –/ (or VOL +/ ) to confirm the
setting. The minutes digits will blink.
4
Press TUNE / repeatedly to set the correct
minutes, then press VOL –/ (or VOL +/ ) to confirm
the setting.
5
Press TUNE / to select the alarm sound source
(either buzzer or radio). The alarm mode name will be
shown on the display (Buzzer=Bu or Radio=rAd). Press
VOL –/ (or VOL +/ ) to confirm. If you select radio,
tune to the station you want and set the volume.
6
Press TUNE / to set the volume of the alarm. The
alarm will turn on at the time you have set and will turn
off automatically after 59 minutes.
7
Repeat these steps to set the alarm to a different time.
Note
In standby mode, press and hold VOL –/ (or VOL +/ )
to reset the alarm time.
Hour digits Minutes digits
PM indicator
Alarm 1
indicator
Alarm 2
indicator
NS-CLOPP2_14-0195_MAN_V3_ENG.fm Page 13 Monday, April 14, 2014 12:09 PM