Using the Pop-up Menu

A number of different functions can be accessed using your frame’s pop-up menu. To access the pop-up menu, press during a slideshow or while browsing single pictures. If a slideshow is playing, it will be paused while the pop-up menu is displayed.

Note: The pop-up menu cannot be accessed while viewing thumbnails.

1Press ￿or ￿to select functions in the pop-up menu. Press to confirm a selection.

2 Pressto hide the pop-up menu and return to Slideshow or Browse mode. Selecting in the pop-up menu will also hide the pop-up menu and return you to Slideshow or Browse mode.

Rotating, zooming, and panning pictures

1Highlight the picture you want to rotate, zoom, or pan in Browse or Slideshow mode. (You cannot access the menu while in Thumbnail mode.)

2Press to access the menu.3To rotate a picture, press ￿or ￿to select , then press to rotate the picture

90 degrees. Or, to zoom and pan a picture, press ￿or ￿to select , then press to zoom the picture. While a picture is zoomed, you can pan the image by highlighting one of the, , ,buttons, then pressing .

4Pressto exit the menu.
To copy pictures from a memory card:

1Insert a memory card containing pictures into the frame’s memory card slot. A slideshow of pictures on the card plays automatically.

2Select the picture you want to copy in Browse or Slideshow mode.3 Press to open the pop-up menu.4 Press ￿or ￿to select the icon. A menu appears on the screen.

To copy only the picture currently being viewed, select Copy One, press to select Yes, then press again.

To copy all pictures on the memory card, select Copy All, press to select Yes, then press again.

Note: Pictures cannot be copied from the frame’s internal memory to a memory card using the frame alone.

Deleting pictures from the frame‘s internal memory

To delete pictures:
1Select the picture you want to delete in Browse or Slideshow mode.2 Press to open the pop-up menu.3 Press ￿or ￿to select the icon. A menu appears on the screen.

To delete only the picture currently being viewed, select Delete One, press to select Yes, then press again.

To delete all pictures in the frame’s internal memory, select Delete All, press to select Yes, then press again.

Note: Pictures cannot be deleted from an inserted memory card using the frame alone.

Note: You can also use your computer to delete files from the frame or from an inserted memory card.

Browsing pictures

To browse pictures from Slideshow mode:
1While in Slideshow mode, press to open the pop-up menu. The slideshow pauses.2 Press ￿or ￿to select or .

3 Select to view the previous picture in the slideshow, or select to view the next picture.

To browse pictures from Browse mode:
1Press ￿or ￿to select .2Press . The icon changes from to .

Pressto hide the pop-up menu and enter Browse mode. You may now view pictures one at a time.

To return to Slideshow mode, press to display the pop-up menu.3Press ￿or ￿to select , then press . changes back to .4 Pressto hide the pop-up menu and enter Slideshow mode.

Changing settings

1From the Main menu, press ￿and ￿to highlight the Settings menu icon , then press to enter the Settings menu.

2Press ￿and ￿to highlight either System Setup or Photo Setup, then press to enter the menu.

3Press ￿and ￿to highlight a setting, then press to enter the setting.4Press ￿and ￿to change the setting, then pressto confirm your selection.
Tip: Pressto return to the previous menu screen.

The settings in the System Setup menu allow you to control the frame’s system-wide settings:

Language: Sets the language used for on-screen menus and displays. Available settings are English, French, and Spanish.

Brightness: Sets the brightness of the LCD screen.

Auto-Power Off: Sets the amount of time that must pass after a button is pressed before the frame automatically shuts off. Available settings are Off, 30 minutes, 1 hour, 2 hours, 4 hours, and 8 hours.

Reset Default: Resets the frame to factory default settings.Version: Displays the frame’s current firmware version.

The settings in the Photo Setup menu allow you to control the frame’s settings for viewing pictures:

Display Mode: Available settings are Slideshow, Browse Mode, and Thumbnail. This settingcontrolswhatyourframedoeswhenyouselectamemorydevicefromtheMainmenu.

Slideshow: A slideshow of pictures contained in the selected memory device automatically begins.

Browse Mode: The first picture contained in the selected memory device is automatically displayed. Press ￿or ￿to scroll through the pictures.

Thumbnail: Thumbnails of the pictures contained in the selected memory device are displayed. Press ￿or ￿to highlight the picture you want to view, then press to display the picture.

Slideshow Time: Sets the amount of time between picture transitions in a slideshow 5 seconds, 10 seconds, 30 seconds, 60 seconds, 60 minutes, and 24 hours.

Slideshow Effect: Sets the special effect to be used for slideshow picture transitions. Available settings are Partition, Erase, Blinds, Random lines, Grid, Cross, Spiral, Rect, Close, Random, and Snake.

Specifications

Picture formatJPG/JPEG

 

 

Panel size3.5 inch (89 mm)
Memory card formatsSD, SDHC, MMC

 

 

Power sourceUSB 5V
Power consumption

< 2W

 

 

Operating temperature

41~95°F (5~35°C)

 

 

Weight0.20 lb. (0.09 kg)

 

 

Dimensions (W × H × D)3.7 × 3.0 × 0.5 inches

 

(95 × 77 × 13 mm)

 

 

Built-in batteryLi-polymer

 

 

Troubleshooting

Make sure that the memory card is one of the supported formats, and that it is inserted correctly.

Make sure that the pictures are JPEG format.

If picture loading is slow, reduce the size of your pictures on a computer before viewing them on the frame.

Some issues may be resolved by turning the frame off and then on again. In extreme cases, you may need to insert a straightened paperclip into the RESET hole on the back of frame.

Important safety instructions

1Read these instructions.2 Keep these instructions.3 Heed all warnings.4 Follow all instructions.5 Do not use this device near water.6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.

9 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the device.

10 Only use attachments/accessories specified by the manufacturer.

11 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the device . When a cart is used, use caution when moving the cart/device combination to avoid injury from tip-over.

12 Unplug this device during lightning storms or when unused for long periods of time.

13 Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device, the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

14 To reduce the risk of fire or electric shock, do not expose this device to rain, moisture, dripping, or splashing, and no objects filled with liquids, such as vases, shall be placed on it.

© 2009 Best Buy Enterprise Services, Inc. All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.

ENGLISH 09-0401