Insignia NS-DPFC01 Adjusting the backlight, Displaying photos, Connecting your clock radio to your computer, High, SLEEP, SLEEP, High, Middle, or Low, To set the backlight level:

Insignia NS-DPFC01 Clock Radio with LCD Photo Viewer

2Repeatedly press SLEEP to decrease the sleep timer in 10 minute increments.

3To cancel the sleep function, repeatedly press SLEEP until “00” shows on the display.

Adjusting the backlight

To set the backlight level:

1Make sure the power is connected.

2Press SNOOZE/DIMMER to set the display backlight to a comfortable level, except when the alarm is on. Your choices include

High, Middle, or Low.

Displaying photos

You can view photos on your clock radio from three sources:

1.A compatible USB device connected to the USB port.

2.A memory card (SD/MMC/MS/XD) plugged into the memory card slot on the side of your clock radio.

3.The clock radio’s internal memory (approximately 128 MB).

Connecting your clock radio to your computer

Photos can be transferred to your clock radio using your personal computer.To connect to a computer you need a USB cable (provided).

Note

Your clock radio may not work with all versions of Microsoft

Windows.

To connect your clock radio to your computer:

1Plug in your clock radio (refer to “Plugging your clock radio”).

2Plug the small end of the USB cable into the USB cable port on the clock radio, then plug the large USB connector into a USB port on your computer.

16www.insigniaproducts.com