Insignia NS-DXFL2C Attaching the flash

NS-DXFL2C External TTL Flash for Canon™

www.insigniaproducts.com

3Close the battery compartment cover and slide it into place.

* Based on four (4) new, AA alkaline batteries.

Attaching the flash

1Turn the camera and the flash off and loosen the locking knob on the

flash.

2With the flash facing toward the front of the camera, slide the flash’s

mounting foot all the way into the camera’s hot shoe.

Recycle time* Flash count*

Approx. 0.1 – 5 seconds Approx. 100 - 1500 flashes

NS-DXFL2C_14-1135_MAN_V2_ENG.fm Page 7 Thursday, October 16, 2014 3:18 PM

Contents

Main NS-DXFL2C External TTL Flash for Canon Contents Welco me Important safety instructions Feature s Package contents Front view #Item Description Back view Setting up your flash Installing the batteries Attaching the flash Removing the flash Turning on the flash Using your fl ash Fully automatic flash shooting Using Flash Exposure Compensation (FEC) Using the Flash Exposure Lock (FEL) Using manual flash (M) Using S1/S2 slave triggering mode Using bounce flash Page Page Setting the flashs custom functions through the camera Over-Temperature Protection Error codes Troubleshooting Problem Solution Specifications Legal notices FCC Part 15 FCC warning ONE-YEAR LIMITED WARRANTY - INSIGNIA Definitions: How long does the coverage last? What does this warranty cover? How to obtain warranty service?