To connect using the side AV input terminals:

1Connect the audio and video cables between the Audio (L,R) and Video terminals on the television and the video equipment.

2Press the INPUT button on the remote control repeatedly until AV2 appears on the screen.

Connecting using the rear AV input terminals

The rear AV terminals are harder to access than the side terminals and should be used for equipment that remains connected to the television, such as a VCR, DVD player, or video game console.

 

To S-video input

 

 

To Video input

 

video-STo output

VideoTooutput

AudioTooutputs

To Audio inputs

Y = Yellow (video)

 

 

 

W = White (audio L)

 

 

 

R = Red (audio R)

Video Equipment

Note

For better quality video, use the S-Video terminal if your source supports it.

S-video input uses the same circuit as AV1. The S-VIDEO terminal overrides the AV1 terminal. When using both the S-video and AV1 inputs, the S-video signal is automatically selected and the message on your screen displays SVIDEO. To view a AV1 signal, disconnect the S-video connection.

To connect using the rear AV input terminals:

1Connect the audio and video cables between the Audio (L,R) and Video terminal on the television and the video equipment.

2Press the INPUT button on the remote control repeatedly until AV1 appears on the

screen.

Insignia NS-F24TV 24” Flat Panel Television

Connecting using the component terminals

Use the component terminals to connect a DVD player that supports this type of output. Component video provides the highest picture quality.

W = White (audio L)

R = Red (audio R, CR)

G = Green (Y)

B = Blue (CB)

Video Cable

Audio Cable

DVD Player

To connect using the component terminals:

1Connect the component video cable between the Y, CB, and CR input terminals on the television and the Y, CB, and CR output terminals on the DVD player.

2Connect the audio cable between the audio input terminals on the television and audio output terminals on the DVD player.

3Press the INPUT button on the remote control repeatedly until COMPONENT appears on the screen.

Note

This television can only receive YCBCR signal but not YPBPR signal through the COMPONENT input.

6

www.insignia-products.com