Insignia NS-H3005 Home Theater System

PROGRAM DETAILS

5 Press MENU when finished making

 

 

 

 

 

 

adjustments.

Easy Information Screen

Easy Information Screen

(Station ID)

(Program details)

Detail

Description

 

 

LENGTH

Indicates the run time of a program.

 

 

TIME REMAINING

Indicates the remaining time of a

 

program.

 

 

RATING

Indicates the rating of the current

 

program (N/A, G, PG, PG-13, R, NC-17,

 

X, and Not Rated). The rating N/A

 

means that the motion picture ratings

 

are not applicable to this program.

Accessing the On-Screen menus

The SETUP, clock setting (CLOCK), and timer recordings (PROGRAM) functions are accessed with the on-screen menus.

Menu selection

Your VCR lets you use the remote control to adjust several features.

To adjust a VCR setting:

1Press MENU. The Main menu appears.

2Select the submenu with the or buttons, then press MEMORY/ENTER.

Note

Menus remain on-screen for three minutes.

Clock Set (page 13)

Program (page 20)

Setting

Description

 

 

Function OSD

Turn on or turn off the on-screen display.

 

Select ON and OFF with or .

 

 

Audio mode

The VCR has two separate audio playback

 

systems, the high quality VHS Hi-Fi system and

 

standard NORMAL mono system. The same audio

 

is generally recorded on both systems. The VHS

 

Hi-Fi system plays on separate (left and right)

 

channels, and the NORMAL system plays

 

monaural sound. The normal track is always

 

played so the tape can be played on a VCR that

 

does not have VHS Hi-Fi.

 

Select Hi-Fi or NORMAL with or .

Broadcast type Multichannel Television Sound (MTS) carries stereo and Second Audio Program (SAP) bilingual signals. Set this setting to the value you want when both MTS stereo and SAP signals are received. When only one of the MTS signal is received, the VCR automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected value. For normal operation, the setting should be STEREO. The VCR then records a stereo program when available, and records a mono program if the program is not in stereo.

For weak stereo or SAP broadcasts, changing the

setting to MONO may give a clearer sound.

Select STEREO, SAP, or MONO with

or .

 

Audio output Used during playback (when AUDIO MODE

(HI-FI/NORMAL) is set to HI-FI) for selecting the

audio output signals from the AUDIO OUT jacks (L

ch and R ch), and RF.OUT.

 

This display setting should normally be left in the STEREO position, so that when a stereo tape is played, the stereo sound is heard through the left and right channels. If a mono tape is played and the audio output is set to STEREO, the same mono sound is heard from both left and right channels.

Select STEREO, LEFT, or RIGHT with or .

Channel Selection

Tuning (page 12)

Setup (page 12)

3Press MENU when finished making adjustments.

VCR Setup menu options

1Press MENU. The Main menu appears.

2Press or to select SETUP, then press MEMORY/ENTER. The Setup menu appears.

This home theater system is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125.

Note

Maker sure that the VCR is connected to an antenna or cable television.

To complete Auto Channel Programming:

1Press MENU. The Main menu appears.

2Press or to select TUNING, then press MEMORY/ENTER. The Tuning menu appears.

3Press or to choose an option on the Setup menu.

4Press or to modify a setting.

12

www.insignia-products.com