Insignia NS-H3005 manual 15

Insignia NS-H3005 Home Theater System

3	Press	to choose SOURCE SELECT, then		Auto Clock Set
	use	or	to select TUNER. Press or	The Auto Clock Set feature is set to ON at the
	repeatedly to switch among TUNER, LINE1			factory. In the ON setting, the home theater
	or LINE2.			system looks for a channel carrying XDS
4	Press	or	to choose AUTO CHANNEL	(Extended Data Services) information. XDS
	SET, then use or to search for			updates the clock using the Coordinated
	channels. The tuner automatically cycles			Universal Time.
	through all available channels in the area and			To use Auto Clock Set:
	stores them in the tuner’s memory.
5 After the Auto Channel Programming is				1 Press MENU. The Main menu appears.
	complete, make sure that the TUNING BAND			2 Press or to choose CLOCK, then press
	is set appropriately (TV or CATV). Select the			MEMORY/ENTER. The Clock menu appears.
	correct TUNING BAND (TV or CATV) with
	or	while in the Tuning menu.
	Remember, TV is for the air antenna
	reception, CATV is for cable or wireless cable
	connection.

6 Press MENU to return to the television screen.

7Press CH/PRESET (-/+) on the front panel or

or on the remote control to change the channel on the VCR.

Adding or erasing channels				3	Press	to choose AUTO CLOCK SET.
				4	Press	or	to choose ON.
This feature lets you add or erase channels from
memory manually.				5	Press	to choose DAYLIGHT SAVINGS.
To add or erase channels from memory:				6	Press	or	to choose AUTO, ON, or OFF.
					If you choose AUTO, the VCR sets the clock
1 Press MENU. The Main menu appears.
					using the Daylight Saving Time information
2	Press	or	to select TUNING, then press
					broadcast in the signal (channel).
	MEMORY/ENTER. The Tuning menu
					If you choose ON, the VCR adjusts the clock
	appears.
					for Daylight Saving Time automatically.
				7	Press	to choose TIME ZONE.
				8	Press	or	to choose the correct time
					zone (AUTO, EASTERN, CENTRAL,
					MOUNTAIN, PACIFIC, ALASKA, or
					HAWAII).
					If you select AUTO as the time zone, the VCR
					sets the clock using the first Coordinated
					Universal Time information it finds in a
					broadcast signal.
3	Press	to choose CH. ADD/DEL on the
				9	Press MENU when finished.
	Tuning menu.
				10	Turn off the home theater system and the
4	Press	or	to select a channel to add or
					auto clock set feature sets the time.
	erase.
5 Press MEMORY/ENTER to add or erase the
				Note
	channel.
				There are cases where the television station does not send or
6 Repeat steps 3 through 5 to add or erase				sends wrong date and/or time information and the home
				theater system sets the incorrect time. If this happens we
	channels.
				recommend that you set the clock manually.
7 Press MENU to close the menu.
				Setting the clock manually
Setting the clock

The home theater system gives you two ways to set the time and date: the Auto Clock Feature or manually. The Auto Clock feature enables the home theater system to set up the clock while the home theater system is turned off.

Note

The clock uses the 12-hour system. Be sure to set AM and PM correctly. AM does not appear on the display.

The initial clock setting is January 1, 2006, 12:00 AM.

To manually set the clock:

1Press MENU. The Main menu appears.

2Press or to choose CLOCK.

www.insignia-products.com 13