Insignia NS-H3005 24

					Insignia NS-H3005 Home Theater System
At the end of the recording, the home theater					Copying from DVD to VCR
system stops recording and shuts off.					This home theater system is capable of copying
					the contents of a DVD to a VHS tape.

Note

•While the Instant Timer Recording is active, you cannot change the channel on the home theater system.

•To stop the recording, press STOP or POWER twice.


INSTANT TI MER RECORD		0H30M .....			9H00M0H00M
CHANNEL	2
		LengthLDisplayength—eachDisplayadditional
SPEED	SP	press(eachof		additionalincreases thepressrecordingof

START	NOW	time by 30		minutes.
		REC/ITR ( )			increases recording
LENGTH	0H30M		time		30 minutes)

Checking the recording time

To check the recording time:

•Press once to check the recording time.

Extending the recording time

To extend the recording time:

•Press to extend the recording time. Subsequent presses result in advancing the recording time by 30-minute increments.

Note

•If you press while in Instant Timer Recording mode, the home theater system enters the Recording Pause mode. Instant timer recording is cancelled.

•If the home theater system is set to 0H00M, the home theater system changes to Normal Recording mode.

Dubbing and editing

If you want to edit or dub your camcorder or VCR recordings to this home theater system, the back (or front) panel mounted audio and video (A/V) input jacks make the connections quick and easy. These direct A/V jacks also provide better picture results than using the RF jack on the back panel.

To dub or edit a recording:

1Connect the camcorder’s or VCR’s A/V outputs to your home theater system as illustrated in “Connecting devices to your home theater system” on page 10.

2Press INPUT to set the input channel to LINE2 if you have connected your camcorder or VCR to the front A/V jacks.

-OR-

Press INPUT twice to set the input channel to LINE1 if you have connected your camcorder or VCR to the A/V input jacks on the back of home theater system.

3Play the tape in the camcorder (or another VCR). If you have a television attached to your home theater system, you can see the video playing.

4When you want to start recording, press the home theater system’s once to start.

Note

•Before recording, confirm the recording start position.

•To stop the dubbing, press twice.

Note

If the DVD you are attempting to copy is copy protected, you cannot copy the DVD. It is not permitted to copy Macrovision encoded DVDs. LOCK is displayed if you try to copy a Macrovision encoded DVD.

To copy from a DVD to a VHS tape:

1Insert the DVD you want to copy in the DVD player and close the disc tray.

2Insert a blank tape into the VCR.

3Press on the front panel or remote control. The DVD starts to play. If the DVD menu

appears, you may need to press again to start playing the DVD.

4Press on the front panel or remote control. The home theater system goes into Record mode and the COPY indicator lights.

5Press or POWER twice to end copying when the DVD is finished playing.

Note

•When you stop the DVD playback during copying, VCR Recording mode also stops automatically.

•You must stop the copy process manually when the DVD movie ends or the home theater system may replay and record over and over again.

VHS Hi-Fi stereo system or MTS broadcast

This home theater system is equipped with the VHS Hi-Fi audio sound system for recording and playback. The following information gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi Audio mode.

To setup the VCR for Hi-Fi Audio mode:

1Press MENU. The Main menu appears.

2Press or to select SETUP, then press MEMORY/ENTER. The Setup menu appears.